Log:
valutazioni - 4, GPA: 4.3 ( )

Istruzioni per l'uso AEG, Modello Miracool 1300L

Produttore : AEG
File Size : 716.6 kb
File Nome : 79bc560002-01_C.pdf
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


Box 5932 Spartanburg, S.C. 29304-5932 Technical Service: 1-800-558-7627 Parts Order Fax: 1-800-262-9381 Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations. Printed in Mexico 6-06 79BC560002-01_C CONTENTS Page GENERAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 UNIT INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 LOCATE UNIT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 LEVEL UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 INSTALL SHELVES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 CONDENSATE DISPOSAL. . . . . . . . . . . . . . . . . . . . . . . . . .5 START-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6,7 PRELIMINARY CHECKS. . . . . . . . . . . . . . . . . . . . . . . . . . .6 INITIALSTART-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 REFRIGERATION SYSTEM SERVICE . . . . . . . . . . . . 8-13 COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 SERVICE AND TROUBLESHOOTING. . . . . . . . . . . . . . .8 MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14,15 LAMPREPLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . .14 CONDENSATEREMOVAL . . . . . . . . . . . . . . . . . . . . . . . .14 CONDENSER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 CABINET EXTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 INTERIORSURFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 GENERAL These instructions cover the installation, operation, and maintenance of Carrier Miracool™ series glass door merchandiser units, sizes 260L, 300L, 750L, 1100L, and 1300L. UNIT INSPECTION Examine all packages for damage to packaging material. Damage to external packaging may have resultedin unit damage. Check packages for all accessories and components, including legs, casters, and shelves. File a claim immediately with the shipping company if shipment is damaged or incomplete. INSTALLATION LOCATE UNIT Refer to Figure 1 for unit components. Units are designed for indoor placement only. Provide at least3 in. of space between unit cabinet and any adjacentwall or fixture. Remove skid base by removing the retaining screws (4 hex head bolt screws). If optionalcasters will be used, unit must be located on flat, level surface. Refer to Table 1 for a list of standard parts. TABLE 1 — STANDARD PARTS PART FACTORY INSTALLED FIELD INSTALLED UNIT SIZE 260L, 300L 750L 1100L, 1300L Quantity Refrigeration Cartridge X 1 1 1 Shelves X 4 5 10 Shelf Clips X 16 20 40 Instruction Manual — — 1 1 1 Leveling Feet X 4 4 4 Lamps X 1 2 2 NOTE: Parts shown are for standard units. Quantity of shelves and clips may vary based on factory-supplied options. 2 LEVELING FOOT SHELF PRODUCT CHAMBER FRONT GRILLE INTERNAL FLUORESCENT LAMP — SIZE 750L (SIZE 260L, 300L — ALONG TOP; SIZE 1100L, 1300L — IN CENTER) UNIT DATA LABEL (INSIDE COOLER IN UPPER LEFT CORNER) FLUORESCENT LAMP SIGNBOARD (SIZES 750L, 1100L, AND 1300L ONLY) FRONT VIEW LEVELING FOOT SHELF PRODUCT CHAMBER FRONT GRILLE INTERNAL FLUORESCENT LAMP — SIZE 750L (SIZE 260L, 300L — ALONG TOP; SIZE 1100L, 1300L — IN CENTER) UNIT DATA LABEL (INSIDE COOLER IN UPPER LEFT CORNER) FLUORESCENT LAMP SIGNBOARD (SIZES 750L, 1100L, AND 1300L ONLY) FRONT VIEW CARTRIDGE COMPARTMENT SERVICE CORD WOOD SKID REAR VIEW WOOD SKID RETAINING SCREW, GRILLE RETAINING SCREW IF USED (HEX HEAD BOLT SCREW) UNIT WITH FRONT GRILLE REMOVED FIGURE 1 — MIRACOOL™ BOTTLE COOLER UNIT COMPONENTS (Size 750L Shown) LIGHTING CORD (RIGHT CONNECTOR) POWER CORD (LEFT CONNECTOR) 3 LEVEL UNIT UNPLUG CARTRIDGE POWER AND LIGHTING CORDS To provide adequate condensate drainage and proper door alignment and operation of unit, the unit cabinetmust be level. Leveling feet are factory installed. Remove refrigeration system cartridge for easier access to back feet. Before servicing unit, disconnect electrical service. On sizes 1100L and 1300L, turn disconnect switch (located on power cord) to the OFF position. Failure to disconnect electrical service could result in elec- trical shock and cause personal injury or death. • TO REMOVE CARTRIDGE 1. After disconnecting the unit from the powersupply, remove the grille retaining screw locatedin the upper-most part of the grille. (See Figure 1.) 2. Lift the grille up and away from the unit. 3. Unplug the power supply and lighting supply cords located in the front of the cartridge (Figure 2). 4. Using a pair of wire cutters, cut wire tie that secures lifting rods at center of front base rail. (See Figure 2.) 5. Take hold of the end of each lifting rod and rotateeach approximately 90-degrees upward so that they are nomina...

Questo manuale è adatto anche per i modelli :
Frigoriferi - Miracool 260L (716.6 kb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie