valutazioni - 2, GPA: 3.5
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Middle hinge Fridge door is heavy, be careful not to injure yourself when removing the CAUTION Fridge door. 4. Disassemble the Middle hinge by removing 2 bolts. Middle hinge 01 SETTING UP 5. Remove the Freezer door from the Bottom hinge by carefully lifting the door straight up. Bottomhinge Freezer door is heavy, be careful not to injure yourself when removing the CAUTION Freezer door. setting up _13 DA99-03236J(EN-1).indd 13 2010.6.15 5:14:27 PM 14_ setting up setting up your refrigerator REVERSING THE Refrigerator DOOR(cont’d) 6. Unscrew the leg front and 2 screws at the Bottom hinge. Before removin the Bottom hinge, remove the leg. 7. Switch the position of the Bottom hinge shaft. Remove the screw on the Auto guide and remove the Bottom hinge shaft with 11mm wrench. Attach the Bottom hinge shaft on the left and put the reversed Auto Guide back. 8. Attach the Bottom hinge on the bottom left side of the refrigerator where 2 screws was previously removed in step 8. Screw remaining bolt on the bottom right side of the refrigerator for the future usage. Screw Auto guide Bottom hinge shaft DA99-03236J(EN-1).indd 14 2010.6.15 5:14:28 PM 9. Switch the position of the Middle hinge cap, from left to the right side. 01 SETTING UP 10. Remove the screw on the bottom right side of the Freezer door. Switch the position of the Door stopper and the Hinge grommet and Bracket Stopper door from the right to the left. DoorstopperHingegrommetMiddlehingecap 11. Switch the Hinge grommet and the Grommet cap on the top of the Freezer door. HingegrommetGrommetcap setting up _15 DA99-03236J(EN-1).indd 15 2010.6.15 5:14:29 PM setting up your refrigerator REVERSING THE REFRIGERATOR DOOR(CONT’D) 12. Carefully put the Freezer door back on. 13. Assemble the Middle hinge with 2 bolts on the left side. 14. Remove the screw on the bottom right side of the Fridge door. Switch the Door stopper and the Hinge grommet and Bracket Stopper door from the left. DoorstopperHingegrommet 15. Use 11mm wrench to separate the Top hinge shaft. Flip the Top hinge and reattach the Top hinge shaft. 16_ setting up DA99-03236J(EN-1).indd 16 2010.6.15 5:14:30 PM 16. Assemble a Top hinge to left side of the Fridge Door. 17. Carefully put the Fridge door back on. Then tighten 3 bolts to assemble the Top hinge. 01 SETTING UP • You must reverse the Type B door handle before putting the Fridge door back. Please refer to page 21. • For Door handle Type A, make sure to switch the door handle after reversing the door. 18. Assembly the Fridge Door to the top of the Ref. setting up _17 DA99-03236J(EN-1).indd 17 2010.6.15 5:14:30 PM setting up your refrigerator REVERSING THE REFRIGERATOR DOOR(CONT’D) 19. Switch the side of the Door cap on the top of the Fridge door. Make sure that red tape on the wire is positioned on the end of the Top left hinge cover. 20. Switch the side of the Display cover Cap. • After reversing the doors, make sure the Fridge and Freezer door gaskets are properly arranged. If not, there might be a noise or dew formed which affects perfomance of the refrigerator. 21. Take off the handle cover and remove the screws, make sure to attach the caps and the handle at the right side of the door.(Make sure to cover the right side with detached caps.) caps and the handle from the right to left side of the door. 18_ setting up DA99-03236J(EN-1).indd 18 2010.6.15 5:14:37 PM LEVELING THE REFRIGERATOR 01 SETTING UPIf the front of the appliance is slightly higher than the rear, the door can be opened and closed more easily. Turn the adjusting legs clockwise to raise and counter-clockwise to lower the height. Case 1) The appliance tilts down to the left. • Turn the left adjusting leg in the direction of the arrow until the appliance is level. Case 2) The appliance tilts down to the right. • Turn the right adjusting leg in the direction of the arrow until the appliance is level. setting up _19 DA99-03236J(EN-1).indd 19 2010.6.15 5:14:39 PM setting up your refrigerator SETTING UP THE REFRIGERATOR Now that you have your new refrigerator installed and in place, you are ready to set up and enjoy the full features and functions of the appliance. By completing the following steps, your refrigerator should be fully operational. If not, first check the power supply and electricity source or try the troubleshooting section at the back of this user manual. If you have any further questions, contact your Samsung Electronics service center. 1. Place the refrigerator in an appropriate location with reasonable clearance between the wall and the refrigerator. Refer to installation instructions in this manual. (Refer to page 11) 2. Once the refrigerator is plugged in, make sure the interior light comes on when you open the doors. 3. Set the temperature control to the coldest temperature and wait for an hour. The refrigerator should get slightly chilled and the motor should run smoothly. 4. After powering the refrigerator, it will take a few hours to reach the appropriate temperatur...
Questo manuale è adatto anche per i modelli :Frigoriferi - RL23THCTS (14.3 mb)
Frigoriferi - RL43THCSW (14.3 mb)
Frigoriferi - RL43THCTS (14.3 mb)