valutazioni - 0, GPA: 0 ( )

Produttore : Bosch File Size : 1.16 mb File Nome : Lingua di insegnamento:

Warning! Do not under any circumstanceswhatsoever connect the appliance toelectronic energy-saving connectiondevices (e.g. Ecoboy, Sava Plug, etc.) or inverse rectifiers which convert DC currents into 230 AC currents (e.g. solar energy systems, maritimeelectricity systems). Connecting the appliance Figure W • Press button 1 to turn the refrigerator compartment on. The light comes on when the door is opened. • Press button 7 to turn the freezer compartment on. • Alarm indicator 5 will light up when the freezer compartment has been turned on. This light will go out when the freezer reaches its normal working temperature. The appliance is factory-set to the following basic settings Refrigerator temperature: +4.C Freezer temperature: -18.C Setting the temperature The set temperatures can be changed. See the descriptions in the following sections: 2 Refrigerator temperature setting button. 4 Freezer temperature setting button. Note refrigeration zonesin the refrigeratorcompartment! The air circulation in the refrigerator compartment means that there are zones at different temperatures. Depending on the model, the zone for sensitive foods is right at the bottom between the arrow on the side and the glass surface below (fig. . !! 1/1 and 2) or between the two arrows (fig. . !! 2/1 and 2). Ideal for storing meat, fish, sausage and salad mixtures, etc. en Information and warningsregarding the appliancewhen in use • The fan (Fig. Q/18) turns itself on and off as required by the refrigerator compartment. • The front of the freezer housing heats up slightly. This prevents condensed water from forming in the area of the door seal. • When the refrigeration system is working, drops of water or frost form on the back wall of the refrigerator. This is perfectly normal and occurs for technical reasons. It is not necessary to scrape the frost or dry the drops as they should disappear automatically. Defrosting water is collected in the drainage duct (Fig. I/A) and returned to the refrigerator system, where it then evaporates. • When air conditions are extremely humid, condensed water may form inside the refrigerator, particularly on the glass shelves. Should this happen, then food in the refrigerator should be wrapped and a lower temperature set. • Sometimes after closing the door, it may not be possible to open it straight away. This is because a depression is created inside the appliance when the door is opened. When this happens, wait two or three minutes before trying to open the door again to allow the depression inside the appliance to be compensated for. • The refrigeration system your appliance uses means that frost may form quite quickly on some points of the freezer shelves. This does not in any way affect the working order of your appliance or bring about any increase in electricity consumption. Accumulated frost need only be removed if the layer of frost or ice reaches a thickness of more than 5 mm on the entire freezer shelf surface. • Do not allow grea...

Scarica la tua

Per scaricare, digitare 2 cifre :