valutazioni - 3, GPA: 3
(
)
)
|
Facilità d'uso
When two battery packs are installed, the pack installed first is charged first. Caution UL Notice: FMW51BC1 / FMW51BC2 External Battery Charger This battery charger is compatible with the following battery packs: ¦ FMW51BP1 battery pack ¦ FMW29BP2 battery pack ¦ FMW29BP1 battery pack ¦ FMW43BP2 battery pack ¦ FPCBP48 battery pack 58-0581-01.fm Page 2 Tuesday, August 21, 2001 9:28 AM Using the Battery Charger To charge your battery pack(s) in the external battery charger: 1. Connect an FPC DC power source such as AC Adapter FMWAC4, FPCAC14, FPCAC23, or Auto/Airline Adapter FPCAA02 to the DC input on the battery charger. The Power status indicator on the charger turns on indicating that external power is supplied to the charger. 2. Insert the battery pack into one of the slots in the battery charger as shown in the following figure until the battery pack is firmly seated in the charger. 3. There are two status indicators on the battery charger, one for each slot. The status indicators change colors to represent different battery conditions, as noted in Table 1. When the battery charger is not in use, remove all batteries and disconnect the DC power source. 2 58-0581-01.fm Page 3 Tuesday, August 21, 2001 9:28 AM Table 1: Status Indicator States Indicator Condition Status Power OFF AC Adapter not connected Green/ON AC Adapter connected Battery 1/ Battery 2 OFF No battery installed Green/ON Charge complete Amber ON Charging Blink Standby (Waiting to charge) Red ON 1 Battery pack alarm Blink 1 Battery charger alarm 1 If the battery charger indicates a fault condition with the battery pack, remove the battery pack, disconnect power to the charger, and contact your local help desk or your reseller for further assistance. 3 58-0581-01.fm Page 4 Tuesday, August 21, 2001 9:28 AM Status Indicators Power 1 Battery 1 2 Battery 2 Slide Connector pins Battery slot 2 Battery slot 1 Rechargeable battery pack DC input Figure 1. External battery charger 4 58-0581-01.fm Page 5 Tuesday, August 21, 2001 9:28 AM Operational Considerations Issues to consider when you use the FMW51BC1 or FMW51BC2 battery charger are discussed as follows: ¦ You can insert up to two battery packs at a time in the battery charger. When charging two battery packs, you can insert or remove either battery pack independently. ¦ The battery charger only charges one battery pack at a time. When two battery packs are inserted in the charger, the battery pack installed first is charged first. ¦ The battery charger will indicate a full charge level and will not begin charging the battery pack if the battery pack charge level is 90% or higher when the battery pack is initially inserted in the charger. This prevents the battery pack from being overcharged. ¦ When you remove the battery pack from your pen tablet, always insert a charged battery pack in the pen tablet to replace the one that you removed, or apply DC power. ¦ The FMW51BP1, FMW29BP1, FMW29BP2, FMW43BP2 and FPCBP48 battery packs use lithium ion battery cells which have no “memory effect.” You do not ...
Questo manuale è adatto anche per i modelli :Caricabatterie - FMW51BC2 (233.77 kb)