Log:
valutazioni - 0, GPA: 0 ( )

Istruzioni per l'uso HP, Modello Intel Gigabit PCI-E

Produttore : HP
File Size : 346.55 kb
File Nome :
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso



• This option has been locked and cannot be changed.
You attempted to change a configuration setting that has been locked by your system administrator with
BootUtil. This message appears from the configuration setup menu when operating in a stand-alone
environment. To change the configuration setting, consult your system administrator.
• PXE-M0E: Retrying network boot; press ESC to cancel.
The Boot Agent did not successful y complete a network boot due to a network error, such as not
receiving a DHCP offer. The Boot Agent continues to boot from the network until successful or until
canceled by the user. This feature is disabled by default. To enable this feature, contact HP Customer
Support.
Troubleshooting procedures
The list of problems and associated solutions in the fol owing sections cover a representative set of problems
that you might encounter while using the Boot Agent. If you are experiencing a problem that is not listed in
this section, contact HP Customer Support.
After booting, my computer experiences problems
After the Boot Agent product finishes remote booting, it no longer has any effect on the client computer
operation. Issues that arise after the boot process is complete are not related to the Boot Agent product.
If you are having problems with the local (client) or network operating system, contact the operating system
manufacturer. If you are having problems with some application program, contact the application
manufacturer. If you are having problems with any of your computer's hardware or with the BIOS, contact HP
Customer Support.
Cannot change boot order
If you are accustomed to redefining your computer's boot order using the motherboard BIOS setup program,
the default set ings of the Boot Agent setup program can override that setup. To change the boot sequence,
you must first override the Boot Agent setup program defaults. To start the Boot Agent configuration setup
program, press the Ctrl+S keys during the time the initialization message appears. A configuration setup
menu appears allowing you to set configuration values for the Boot Agent. If you do not press the Ctrl+S keys,
the Boot Agent software proceeds with the boot process, eventual y bringing up the operating system.
My computer does not complete POST
If your computer does not boot with an adapter installed but does boot when you remove the adapter, move
the adapter to another computer and use BootUtil to disable the flash chip.
If this does not work, the problem might be occurring before the Boot Agent software begins operating. In this
case, there might be a BIOS problem with your computer. For assistance, contact HP Customer Support.
There are configuration or operation problems with the boot process
If the PXE client receives a DHCP address, and then does not boot, the PXE client is working correctly. Check
your network or PXE server configuration to troubleshoot the problem. For assistance, contact HP Customer
Support.
POST hang occurs if two or more ports on Quad Port Server Adapters are configured for PXE
If you have a Gigabit VT Quad Port Server Adapter, PRO/1000 PT Quad Port LP Server Adapter, or a
PRO/1000 PF Quad Port Server Adapter with two or more ports configured for PXE, you might experience
POST hangs on some server systems. Move the adapter to another system, and then disable PXE on al but
one adapter port. Disable any on-board SCSI or SAS control ers in the system BIOS.
Configuration and diagnostics 22


...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie