This test/condition mode is automatically started every 11th cycle of the charger. Testing the NiCd Standard Battery Pack takes approximately four hours; testing the NiMH High Capacity Battery Pack takes approximately 8-10 hours. To manually start the test, press the MODE button. To stop the test, press the MODE button. However, it is highly recommended that the test be allowed to complete. Battery Pack Bins If a Wireless Telephone is to be used during the recharging cycle, fully charged Batt

For applications with a high current pulse (e.g., photoflash) and continuous drain, Duracell offeres high rate 3 and 6-volt lithium batteries. Low power lithium coin cells are also available for use in memory backup applications and small electronic devices. All DURACELL® lithium batteries offer high energy density, excellent rate capability, great low temperature performance(1), and excellent shelf life. DURACELL NOMINAL dimensions(2) NOMINAL NOMINAL CROSS REFERENCE PRODUCT SIZE VOLT

± J m. A. A. A. A. Model No. DC1414 Part No. DC1414 Power Source A.C. Only 115V Batteries For 7.2V ~ 14.4 V, 1.3Ah ~ 3.0Ah Ni-Cad or Ni-MH Batteries Tool Model No. All 7.2V ~ 14.4V Cartridge Battery Tool Models Item No. Part No. No. Used Description 2 153744-2 1 Charger Case Com 3 667982-5 1 Cord With Plug 2P-18-2.0 4 418339-1 1 Charger Case Cover 5 265999-8 4 Tapping Screw 4X25 6 631585-1 1 Circuit Board (Includes 647321-5 - Varistor & 652727-4 - Fuse) 7 418477-9 1 Battery Box

Used Description 2 153744-2 1 Charger Case Com 3 667982-5 1 Cord With Plug 2P-18-2.0 4 418339-1 1 Charger Case Cover 5 265999-8 4 Tapping Screw 4X25 6 631585-1 1 Circuit Board (Includes 647321-5 - Varistor & 652727-4 - Fuse) 7 418477-9 1 Battery Box 04-2004

A SPARK NEAR THE BATTERY MAY CAUSE BATTERY EXPLOSION. TO REDUCE THE RISK OF A SPARK NEAR THE BATTERY: a. Check the polarity of the battery post. The POSITIVE (POS, P, +) usually has a larger diameter than the NEGATIVE (NEG, N, -) post. b. Attach at least a 24 inch long 6-gauge (AWG) insulated battery cable to the NEGATIVE (NEG, N, -) battery post. c. Connect the POSITIVE (RED) charger clamp to the POSITIVE (POS, P, +) post of the battery. d. Position yourself and the free end of the cable as far

Please refer to the charts and discharge data shown for examples of the energy / service life that the battery will provide for various load conditions. This data is subject to change. Performance information is typical. Contact Duracell for the latest information 6/08

Product Compatibility It is important to note that syncCABLE has been tested with and is designed to be used with a specific range of cellular phones. Below is a list of syncCABLE models and phones that they are compatible with. Item Number 06265 BlackBerry and Motorola Sync Cable: Sync and Charge: BlackBerry models Curve, 8100 Pearl, 8310, 8800 and 8830 Motorola models KRZR K1m, Q, Q Global, Razr V3, Rizr Z3 and W490 Charge Only: BlackBerry models 7100i, 7130e and 8703e Item Number 06266 LG Syn