valutazioni - 1, GPA: 4
(
)
)
|
Facilità d'uso
After 10 minutes of inactivity, the HDD will enter into sleep mode. If the device is in sleep mode, it will take up to 30 seconds to wake up and respond to the first request. It will respond normally to subsequent requests, until the next period of 10 minutes of inactivity. Fill Gauge (range in percentage) Corresponding LED(s) lit Less than 30% #1 30% - 50% #1, #2 50% - 70% #1, #2, #3 70% - 90% #1, #2, #3, #4 More than 90% #1, #2, #3, #4, #5 Canvio® Personal Cloud 10 Copyright © 2012 Toshiba Back View . Reset button: This button is used to reset the name of the Canvio® Personal Cloud and the admin password (“admin”) without erasing any data. To reset, hold down the reset button for 2 seconds, until the LEDs on the front panel flash. . USB port: This port is used to connect an external USB disk, USB flash drive, or a USB printer. . Ethernet port: This port is used to connect the ethernet cable from your Canvio® Personal Cloud to the network router or switch. . Kensington lock slot: This slot can be used with any Kensington-compatible lock to secure the Canvio® Personal Cloud. . 12V DC: This can only be used with the Toshiba approved and supplied power adapter. Always confirm that the power plug (and extension cable plug, if used) has been fully inserted into the socket, to ensure a secure electrical connection. Failure to do so may result in a fire, electric shock, or serious injury. Toshiba does not assume any liability for any damage caused by the use of an incompatible adapter. Canvio® Personal Cloud Copyright © 2012 Toshiba 11 Canvio® Personal Cloud The Canvio® Personal Cloud package contains: • Canvio® Personal Cloud device • AC adapter • Ethernet cable • Installation software CD • Quick Start Guide Note The User Manual can also be found on the Toshiba Service and Support Site at on the installation software CD, or in the Canvio® Personal Cloud.s Public folder. To Set Up the Canvio® Personal Cloud 1. One end of the ethernet cable is plugged into the Canvio® Personal Cloud. (Refer to the Back of the Canvio® Personal Cloud) 2. The other end of the ethernet cable is plugged into the network router or switch, which is not included in the package, on your network. 3. The AC adapter is plugged into the Canvio® Personal Cloud (Refer to the Back of the Canvio® Personal Cloud). Then, plug the other end into an AC power outlet. 4. You must use a PC equipped with: a. an optical or CD-Rom drive, or an internet connection to download the installation software from the Toshiba Service and Support web site at b. access to the network and internet connection. The network connection must be on the same network router or switch that you are using to connect the Canvio® Personal Cloud. c. one of the following operating systems must be installed: o Microsoft® Windows® XP Service Pack 3 32-bit o Windows Vista® 32- or 64-bit o Windows® 7 32- or 64-bit (Home Premium, Prof...
Questo manuale è adatto anche per i modelli :Hard Disk - Canvio Personal Cloud HDNB120XKEG1 (1.97 mb)
Hard Disk - HDNB120XKEG1 (1.97 mb)
Hard Disk - HDNB130XKEG1 (1.97 mb)