LED Indicators There are two LED indicators behind the speaker grille. Red indicates that there is a UHF transmission signal from the microphone. The green lights when audio is being transmitted. For 16-Channel UHF Powered Speaker Only Transmitters There are two wireless microphone transmitters available; Q-316 handheld microphone and M-316 Beltpack transmitter. Q-316 Install 2 AA Alkaline batteries (included) and switch ON the Microphone. Wait 5 seconds prior to talking into the microphone. Adjust the UHF receiver volume and speaker volume to the desired level. M-316 Install 2 AA Alkaline batteries (included). Plug in one of the three available microphones. (see page 5). The M-316 has a volume control which should be set at the lowest level before turning on the power. After turning the power ON gradually increase the volume to a comfortable level. As with the handheld microphone there is a 3-5 second delay before transmitting. Microphone Lockout Two wireless microphones cannot be used at the same time unless one is turned off while the other is being used. Otherwise the first to be turned on will block out the other. NOTES Turn the transmitter power switch off when not being used to minimize battery drain. 5 Specifications Speaker System (PI30, PI30-PS and PI30-SP) Power Capacity 30 Watts RMS power capacity, 6 Ohms impedance Sound Pressure Level: 93 dB, 1 Watt @ 1 Meter Dispersion: -3dB @ 120 degrees off axis Frequency Response: 250Hz to 12KHz Transducers: Three each 3.5” Diameter, High Energy Neodymium Magnets, 10 Watts RMS capacity 3/4” Dia. Voice Coil, 16 Ohm Amplifier: 15 Watts RMS @ 5% THD Power Source: 100-240 volt AC universal power supply 12 VDC to amplifier Dimensions: 12” H x 5” W x 4” D Weight: Speaker 3 lbs. Bracket 1.3 lbs. Compliance: Power Adapter CE, C-UL PI30 Only Wireless System Receiver: One 16 channel selectable UHF diversity wireless receivers 798-805 MHz. Antennas are hidden internally. Microphone Transmitters: Handheld wireless microphone or beltpack transmitters optional. Powered by 2 ea. 1.5 volt AA batteries (included). Choice of headset, collar or lapel microphone for the beltpack. PI30 and PI30-PS Line In Line level RCA jacks (2) providing for audio input from CD, Tuner, LCD projector via cable. Mic. In 1/4” jack for microphones with a cable. 6 ! CAUTION RISK OF ELECTRIC SHOCK - DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QAULIFIED PERSONNEL. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance. The lightening flash with arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons. ! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, SO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This product is not designed to function normally in strong electrom...

Questo manuale è adatto anche per i modelli :
Altoparlanti - PI30 (438.66 kb)
Altoparlanti - PI30 (438.66 kb)
Altoparlanti - PI30-SP (438.66 kb)
Altoparlanti - PI30-PS (438.66 kb)