valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Turn on • Press . »»The unit switches to the last selected source. EN Switch to standby • Press again to switch the unit to standby mode. »»The time and date (if set) appear on the display panel. Set time and date 1 In standby mode, press and hold SET TIME for 2 seconds. »»[12H ] begins to blink, and you can hear a beep. 2 Press TUNE+ or TUNE- to select the 12/24 hour format. 3 Press OK to confirm. »»00:00 will display, and the hour digits begin to blink. 4 Repeat steps 2-3 to set the hour, minute, month, day and year. Tip ••In 12 hour format, [MONTH--DAY] is displayed. ••in 24 hour format, [DAY--MONTH] is displayed. Note ••When iPod/iPhone/iPad is connected, the docking unit synchronizes time from the iPod/iPhone/iPad automatically. English EN 4 Play Play from iPod/iPhone/iPad You can enjoy audio from iPod/iPhone/iPad through this unit. Compatible iPod/iPhone/iPad The unit supports the following iPod, iPhone, and iPad models: Made for: • iPod nano (7th generation) • iPod touch (5th generation) • iPad (4th generation) • iPad mini • iPhone 5 Listen to the iPod/iPhone/iPad 1 Press SOURCE repeatedly to select the DOCK source. 2 Load the iPhone/iPod/iPad. • To pause/resume play, press . • To skip to a track, press / . • To search during play, press and hold / or PRESET +/PRESET -, then release to resume normal play. Charge the iPod/iPhone/iPad When the unit is connected to power, the docked iPod/iPhone/iPad begins to charge. Tip ••For certain iPod models, it may take up to a minute before the charging indication appears. Play from an external device You can also listen to an external audio device through this unit. 1 Press SOURCE repeatedly to select the AUDIO IN source. 2 Connect a 3.5mm audio link cable (not supplied) to: • the AUDIO IN jack (3.5mm) on the back of the unit. • the headphone jack on an external device. »»the screen displays scrolling text message [AUDIO IN] and the current time. 3 Start to play the device (see the device user manual). EN 5 Listen to radio Note ••Only FM radio reception is available on this unit. Tune to a radio station Tip ••For optimal reception, fully extend and adjust the position of the FM antenna. ••Position the antenna as far as possible from TV, VCR or other radiation source. ••[STEREO] is the default setting for tuner mode. ••In tuner mode, you can press OK/ to toggle between [STEREO] and [MONO], and the unit memorizes your setting even if you turn off the unit or turn to other sources. 1 Press SOURCE repeatedly to select FM mode. 2 Press and hold TUNE+/TUNE- for more than 2 seconds. »»The radio tunes to next station with strong reception automatically. 3 Repeat step 2 to tune to more stations. • To tune to a weak station, press TUNE+/TUNE- repeatedly until you find optimal reception. Program radio stations Radio station preset allows you to save radio stations, and quickly tune to a favorite station. Note ••The preset list can store up to 20 stations. ••If the preset list is fully occupied, the screen will show [FULL] (full). ••When you save a radio station to a position that has already been occupied, the original radio station will be replaced. Program radio stations manually 1. Press SOURCE repeatedly to enter the FM mode. 2. Press TUNE+/TUNE- to tune to a radio station. 3. Press PROG/SCAN. »»A position number flashes. 4. Press OK to save current radio station to the selected position. Tip •• Press PRESET +/PRESET - to change the position to save a radio station. Program radio stations automatically 1 Press SOURCE repeatedly to enter the FM mode. 2 Press and hold PROG/SCAN. »»The screen displays [AUTO] (auto); »»The unit starts to scan for all available radio stations automatically, and stores them to the preset list. 3 Wait until the auto scan finishes. »» The first station in the preset list broadcasts automatically. Select a preset radio station 1 Press / to select a preset number. English EN 6 Other features Set the alarm timer You can set two alarms at different times. Note ••Ensure that you have set the clock correctly. 1 Press and hold AL1 or AL2. »»The hour digits begin to blink, and you can hear one beep. »»[AL SET] (alarm set) flashes on the screen. 2 Press TUNE+/TUNE- repeatedly to set the hour. 3 Press OK to confirm. »»The minute digits begin to blink. »»[AL SET] (alarm set) flashes on the screen. 4 Repeat steps 2-3 to set the minute, select when to ring alarm, and choose alarm sound source and alarm volume. After alarm volume is set, the unit will exit alarm setting, and you can hear two beeps. Tip ••If you select DOCK as the alarm sound source, when there is no device docked, the alarm will automatically switch to buzzer to ring the alarm. ••If both alarms are set to the same time, only Alarm 1 will ring. View the alarm settings Press AL1 or AL2 to view alarm settings. Activate and deactivate the alarm timer When an alarm setting is shown on the screen, press AL1/AL2 repeatedly to activate or deactivate the timer. »»If the timer is activated, [ AL 1] o...