And for applications where the center channel speaker needs to be above or below a plasma/LCD or other screen, the A53W can be angled up or down to provide excellent placement of center channel dialog. BUILT FOR HOME THEATER Whether it's the majestic crescendo of your favorite movie soundtrack, the spine-tingling sensation of an unexpected sound, or the rumble you can feel with every explosion – we all want to truly experience home theater. Speakers designed for surround sound must balance clari
This application provides the best sound quality, staging, and depth possible in areas with a defined listening position. Figure 2.1 shows an example of an outdoor stereo listening area. Figure 2.1 - Stereo Application Mono/DVC In many instances, mono or DVC setup will provide a better listening experience in outdoor areas. Mono applications combine the left and right signals to provide the full sound of a piece of music to each speaker in the system without left/right separation. DVC applicatio
91dB Frequency Response ........................................................................................................................................34Hz to 20kHz Power Handling ....................................................................................................................................................... 115 Watts Cutout Dimensions ...................................................................................................................................
BK8C A82C System Type ....................................................................................................................................................................... 2-Way Woofer ................................................................................................................................. 8" Injection Molded graphite (IMG) Tweeter ............................................................................................................................
92dB Frequency Response ........................................................................................................................................32Hz to 22kHz Power Handling ....................................................................................................................................................... 125 Watts Cutout Dimensions ...................................................................................................................................
If you must cross high-voltage lines, always do so at a 90 degree angle to avoid audible hum through the speakers!. Note 3: When pre-wiring for In-wall speakers, it is essential to make direct wire runs from the head-end to each speaker. Do not run speaker wires in series or parallel, and do not “daisy-chain” speakers to common wiring. ©2007 • All rights reserved. © 2007 • All rights reserved. 7 Storm Series In-wall Speakers Pre-Wiring The audio/speaker cable runs should be routed from the head-
ww ww oo M O Provides big outdoor sound at a great price point. Features low, powerful bass, warm mids and open, airy highs.oo M 0 Technology in reach.™ OUTDOOR SPEAKERS BUILT TO WEATHER THE STORM Constructed and tested to withstand the harshest outdoor conditions, The ATON™ Storm Series Outdoor Speakers are guaranteed to provide years of reliable outdoor use. Each model’s all-weather cabinet design effectively shields the speaker from the elements and makes the speaker ideal for any outdoor app
..Place the DLA2/4/6 in the same equipment location as the Receiver/Amplifier. ..Turn off all power to the Receiver/Amplifier and make sure the DLA2/4/6 power supply is unplugged! ..Strip approximately 3/8" of insulation from the ends of all speaker and control wiring. Twist the exposed end of each speaker wire to ensure that no loose strands remain. * If applicable. Cat5 is used for touch pad and IR receiver wiring 3/8" Speaker Wire Cat5 Wire 3/8" A Stereo Receiver with "A/B" 1 Choose Receiver/
2. Radio Frequency devices operating nearby in same frequency band Check for other devices in the home or neighboring dwellings and relocate if possible ©2008 • All rights reserved. DLA2/4/6 Speaker Level Audio Router Appendix A: Specifications DLA2/4/6 Power Input +12 VDC, 2.1 Amps Amplier Impedance 4 - 8 Ohms Speaker Impedance 4 - 8 Ohms Frequency Response 20 HZ to 20 kHZ +/- 1 dB Power Handling Per Channel: 125 Watts RMS Max Attenuation -56 dB @ Last Step Dynamic Range 43 dB over 12 steps THD
Introducing ATON's Storm Series LCR Theater Speakers. Voiced in our sound labs, each model was built to deliver what we love about the movies: drama, tension and surprise...the perfect edge-of-your-seat experience. HEARD, NOT SEEN Storm Series Speakers are designed to blend in with any home environment. Both models feature flat, unobtrusive profiles, paintable mesh grills and sleek perimeter trims. All Storm Series models are designed for indoor and outdoor use and carry a limited lifetime warra