Voice Coil, 16 Ohm Amplifier: 15 Watts RMS @ 5% THD Power Source: 100-240 volt AC universal power supply 12 VDC to amplifier Dimensions: 12” H x 5” W x 4” D Weight: Speaker 3 lbs. Bracket 1.3 lbs. Compliance: Power Adapter CE, C-UL PI30 Only Wireless System Receiver: One 16 channel selectable UHF diversity wireless receivers 798-805 MHz. Antennas are hidden internally. Microphone Transmitters: Handheld wireless microphone or beltpack transmitters optional. Powered by 2 ea. 1.5 volt AA batteries

BATHTUB, WASHBOWL, KITCHEN SINK, LAUNDRY TUB, WET BASEMENT OR SWIMMING POOL. VENTILATION - DO NOT SITUATE THE APPLIANCE SO THAT ITS LOCATION OR POSITION INTERFERES WITH ITS PROPER VENTILATION. FOR EXAMPLE, THE APPLIANCE SHOULD NOT BE SITUATED ON A BED, SOFA, RUG OR SIMILAR SURFACE THAT MAY BLOCK THE VENTILATION OPENINGS. THE APPLIANCE SHOULD NOT BE PLACED IN A BUILT-IN INSTALLATION, SUCH AS A BOOKCASE OR CABINET, THAT MAY IMPEDE THE FLOW OF AIR THROUGH THE VENTILATION OPENINGS. HEAT - SITUATE TH

! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, SO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This product is not designed to function normally in strong electromagnetic fields. Consequently, the audio quality may degrade while the product is exposed to strong electromagnetic fields. Normal audio quality operation will be recovered when the strong electromagnetic field is no longer present. Ce produit n’est pas concu pour un fonctionnement dans de forts champs electromagnetiques. Pa

The volume can be controlled in two ways; using the “Up” “Down” buttons on the mixer panel or using the RC-300 infrared remote control. The remote sensor must be used in front of the speaker as the sensor is behind the speaker grille. Recommended Set-up Procedure Ideally the master volume should be at maximum volume before the wireless receiver and microphone volumes are adjusted to the desired loudness. Since there are always at least two (2) volume controls to contend with, it is suggested tha

A red LED indicates RF (radio frequency) from the microphone, while an amber LED indicates audio. Wireless Transmitter The PowerPro PA916 incorporates a 16 channel UHF transmitter with its own power switch for wireless transmission to the Powered Companion Speakers PA916-SP. The transmitter is preset at the factory to channel 13. It is recommended that the user not randomly change this setting. If using the transmitter function change wireless receiver “A” from channel 1 to any other channel exc

Use only industry approved mounting methods and hardware. Califone cannot be responsible for improper installation or subsequent damage. 1 Spring-loaded terminals 1 4 Setup and Operation for Powered Array Speakers (PI39 and PI30-PS) Power Plug the power adapter into a standard AC outlet and the DC plug into either of the DC jacks on the rear of the speaker. Microphone For use with a cabled microphone, plug the mic into one of the 1/4” phone jacks before turning on the power. Turn the power ON (t

It includes the PowerPro 90-watt RMS Master speaker(PA-916), non-powered support speaker (PA916-SP), wired and wireless mics, tripods and stands. The main speaker (PA-916) can also be used as a stand alone system. The Deluxe Package can be used at any kind of venue and is powerful to address crowds of 1750people or more (with added speakers). The PA-916 includes two built-in wireless mic receivers, aCD player and a variable speed cassette recorder/player. It has two combination XLR / 1/4” jacksf

Microphone For a cabled microphone, plug it into one of the 1/4” phone jacks before turning on the power. Turn the power ON (the red LED will light) and adjust the volume to the desired level while speaking into the microphone. Receiver If using a wireless microphone transmitter, first turn on the receiver power and adjust the volume to 10 o’clock. Then turn the speaker power and adjust the volume level to 10 o’clock. Line-In Two pair of RCA jacks are provided to connect audio from CD, LCD Proje

circuit Frequency Response 45 Hz to 18 kHz Amplifier 90 Watts RMS Sound Pressure Level 94 dB, 1 Watt @ 1 Meter Power Sources 100-240 volt AC universal power supply, two 12 volt (sealed and maintenance-free) lead acid batteries included Wireless System Transmitter 16-channel UHF wireless, 740-801MHz, PLL, 300’ range Receivers Two 16-channel UHF wireless, 740-801MHz, PLL, internal antenna, on/off volume control, Audio & Radio Frequency receiving LED, 150’ reception range from mics (handheld wirele

circuit Frequency Response 45 Hz to 18 kHz Amplifier AC - 90 Watts RMS, DC - 76 Watts RMS Sound Pressure Level 94 dB, 1 Watt @ 1 Meter Power Sources 100-240 volt AC universal power supply and 12 volt lead acid (sealed and maintenance-free) batteries included Wireless System Receivers One wireless 16 selectable channel UHF, 794-806 MHz, PLL, internal antenna, on/off volume control, Audio & Radio Frequency receiving LED Transmitter 300’ range. Handheld wireless mic or belt pack transmitter with th