valutazioni - 5, GPA: 3.4 ( )

Produttore : Sony File Size : 1.46 mb File Nome : Lingua di insegnamento:

Foto e specifiche   Sony  CDX-4000RV

“TP” appears in the display when the unit finds a station broadcasting traffic announcements. When the traffic announcement starts, “TA” flashes. The flashing stops when the traffic announcement is over. Tip If the traffic announcement starts while you are listening to another programme source, the unit automatically switches to the announcement and goes back to the original source when the announcement is over. Notes • "NO TP" flashes for five seconds if the received station does not broadcast traffic announcements. Then, the unit starts searching for a station that broadcasts it. • When "EON" appears with "TP" in the display, the current station makes use of broadcast traffic announcement of other stations in the same network. 14 To cancel the current traffic announcement Press (TA), (SOURCE) or (MODE). To cancel all traffic announcements, turn off the function by pressing (TA) until “TA-OFF” appears. Presetting the volume of traffic announcements You can preset the volume level of the traffic announcements beforehand so you won't miss the announcement. When a traffic announcement starts, the volume will be automatically adjusted to the preset level. 1 Turn the volume control dial to adjust the desired volume level. Presetting the RDS stations with the AF and TA data When you preset RDS stations, the unit stores each station's data as well as its frequency, so you don't have to turn on the AF or TA function every time you tune in the preset station. You can select a different setting (AF, TA, or both) for individual preset stations, or the same setting for all preset stations. Presetting the same setting for all preset stations 1 Select an FM band (page 10). 2 Press (TA) for two seconds. “TA” appears and the setting is stored. Receiving emergency announcements If an emergency announcement comes in while you are listening to the radio, the programme will be automatically switched to it. If you are listening to a source other than the radio, the emergency announcements will be heard if you set AF or TA to ON. The unit will then automatically switch to these announcements no matter which source you are listening to at the time. 2 Press (af) and/or (ta) to select "AF-ON" and/or "TA-ON." Note that selecting “AF-OFF” or “TA-OFF” stores not only RDS stations, but also non-RDS stations. 3 Press (menu), then press either side of (prst) repeatedly until "BTM" appears. 4 Press the (+) side of (seek/ams) until "BTM" flashes. 5 Press (ENTER). Presetting different settings for each preset station 1 Select an FM band, and tune in the desired station (page 10). 2 Press (af) and/or (ta) to select "AF-ON" and/or "TA-ON." 3 Press the desired number button until "MEM" appears. Repeat from step 1 to preset other stations. 15 Locating a station by programme type You can locate the station you want by selecting one of the programme types shown below. Press (dspl/pty) during FM reception until "PTY" appears. Programme types Display News NEWS Current Affairs AFFAIRS Information INFO Sports SPORT Education EDUCATE Drama DRAMA Culture CULTURE Science SCIENCE Varied VARIED Popular Music POP M Rock Music ROCK M Easy Listening EASY M Light Classical LIGHT M Classical CLASSICS Other Music Type OTHER M Weather WEATHER Finance FINANCE Children's Programmes CHILDREN Social Affairs SOCIAL A Religion RELIGION Phone In PHONE IN Travel TRAVEL Leisure LEISURE Jazz Music JAZZ Country Music COUNTRY National Music NATION M Oldies Music OLDIES Folk Music FOLK M Documentary DOCUMENT pry 1 ... Ill V D-BASS Turn ■ ru The current programme type name appears if the station is transmitting the PTY data. “-----” appears if the received station is not an RDS station, or if the RDS data has not been received. Press (prst) repeatedly until the desired programme type appears. The programme types appear in the order shown in the above table. Note that you cannot select “NONE” (Not specified) for searching. C) pjLj V D-BASS 5PDRT Press (ENTER). The unit starts searching for a station broadcasting the selected programme type. Not specified NONE 2 3 Note You cannot use this function in some countries where no PTY (Programme Type selection) data is available. 16 Setting the clock automatically The CT (Clock Time) data from the RDS transmission sets the clock automatically. 1 During radio reception, press (menu), then press either side of (prst) repeatedly until "CT" appears. 5ET CT-OFF 2 Press the (+) side of (seekams) repeatedly until "CT-ON" appears. The clock is set. 5ET FT- ON 3 Press (enter) to return to the normal display. To cancel the CT function Select "CT-OFF" in step 2. Notes • The CT function may not work even though an RDS station is being received. • There might be a difference between the time set by the CT function and the actual time. Other Functions You can also control the unit with a rotary commander. Labelling the rotary commander (option...

Scarica la tua

Per scaricare, digitare 2 cifre :