Log:
Scaricare : 2   File Size : 1 mb   Produttore : Troy-Bilt  
Categoria : Benzo e seghe
@name@name

Insufficient guide bar lubrication and operating the saw with chain that is too tight will contribute to rapid bar wear. To help minimize bar wear, the following guide bar maintenance procedures are recommended. BAR WEAR - Turn guide bar frequently at regular intervals (for example, after 5 hours of use), to ensure even wear on top and bottom of bar. BAR GROOVES - Bar grooves (or rails which support and carry the chain) should be cleaned if saw has been used heavily or if saw chain appears dirty

Scaricare : 1   File Size : 28 mb   Produttore : Troy-Bilt  
Categoria : Benzo e seghe
@name@name@name

F. Depress the LOCK/OFF button with your right thumb. Squeeze the trigger with your index finger (Fig. 7). G. While the motor is running, activate the Chain Brake® by rolling your left hand forward against the lever. H. Chain and motor should stop abruptly. If the chain andWARNING: motor fail to stop when the Chain Brake® is engaged, take the saw to the nearest Authorized Service Center. Do not use the saw if the Chain Brake® is not in proper working order. EXTENSION CORDS When using an electric

Scaricare : 3   File Size : 265 kb   Produttore : Troy-Bilt  
Categoria : Benzo e seghe
@name

MODEL NO. TB3516NT / 41AZ356P766 N/A No. STK CODE Parts No. Description Q No. STK CODE Parts No. Description Q 1 MC-6228-211403 HOUSING (R) 1 36 MC-6024-211507 SPRING 1 2 MC-6228-211504 CHAIN COVER ASS'Y 1 37 MC-6QABB04-20 SCREW 3 MC-6012-210501 WASHER 1 38 MC-6181-211501 CLUTH 1 4 MC-6017-210103 OIL COVER 1 39 MC-6181-211502 CLUTH 5 MC-6SDABB04-18 SCREW 13 40 MC-6024-211503 SPRING 1 6 MC-6043-211302 ADJUSTMENT PLATE 1 41 MC-6014-211501 WASHER 7 MC-6050

Scaricare : 1   File Size : 2 mb   Produttore : Troy-Bilt  
Categoria : Benzo e seghe
@name@name@name

Be sure that the saw’s chain stops moving when the throttle control trigger is released. • Use extreme caution when cutting small-sized brush and saplings because slender material may catch the chain saw and whip towards you or pull you off balance. •When cutting a limb that is under tension, be alert for springback so that you will not be struck when the tension in the wood fibers is released • Do not cut through nails, rods in the tree, railroad ties or pallates. Inspect a tree that you are go





categorie