Select the desired mounting area on your car dashboard that will allow ease of use and full visibility of the LCD display. Peel off the protective paper on the adhesive pad. Make certain the dash area is clean of all wax, grease, etc., and press the remote control in place. Allow a 1/2 hour for the adhesive to secure, then you will find the Velcro pads will allow you to remove the remote control for hand-held use if desired and replace it as often as needed. MOUNTING THE FM MODULATOR There are t

1 pc. 4 pcs. 1 pc. Self-tapping screw Seals (A) Seals (B) (M5 x 12) 4 pcs. 1 pc. 1 pc. OTHER ACCESSORIES CD Magazine Index seal sheet Installation Manual Owner’s guide 1pc. 1pc. 1pc. 1pc. BEFORE INSTALLING THE UNIT Transport Lock Screws The mechanism in the CD changer is "locked" into place during shipment by the transport screws. Be sure to remove the screws prior to installation. . Caution . After removing the transport lock screws, place the supplied seals (A) over the screw holes. These seal

NOTES ON “ ” • During playback (batteries are in use), “ ” is off. • When the battery voltage level is low, “ ” will flash for approx. 10 ~15 minutes, playback still continues in this period. • Playback would automatically come to a stop when the batteries have no more power. Do not repeatedly press “ ” button as the unit may operate incorrectly. Replace all the batteries with new ones. • “ ” will not be on when an AC adaptor is used. USING ON HOUSE CURRENT If the unit you purchased does not inc

anti-vibration springs are not set correctly, if the changer is mounted in excess of a 15° angle, or when travelling on very rough TEMPERATURE road surfaces. If this should occur, check for errors made during The unit may not operate correctly in extremely hot or cold installation or wait for the road surface to improve. temperatures. It is equipped with a built-in thermal protection circuit which will stop operation of the unit when the temperature 3" (8cm) CD-SINGLES reaches the pre-set level.

4. Discs should be put back in their cases after use to avoid serious scratches that could cause the sound to skip. 5. Do not expose discs to direct sunlight, high humidity, or high temperatures for extended periods of time. Long exposure to high temperatures can warp the disc. 6. Do not stick paper, labels, or tape on the disc surface. 7. Do not write with any type of pen, pencil, or marker on the disc surface. 8. To minimize fingerprints and smudges on the signal surface, always try to hold th

When the volume level between the front and rear speakers is equal, a single bar will be shown on the display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated. 8 LOUDNESS CONTOUR (LOU) When listening to music at low volume levels, this feature will boost the bass and treble ranges to compensate for the characteristics of human hearing. Press the LOU button to activate this feature as indicated by LOUD

If you Notes: • The normal function of the product reconnect the power source for resume • The CD player and adaptor shall not be exposed filled with liquids, such as vases, shall be placed ON INSTALLATION Never install the unit where it would be subject to: - heat sources such as radiators or airducts. - direct sunlight. - excessive dust. - moisture or rain. - mechanical vibration or shock. - uneven surface. • Do not place any heavy object on top of the unit. • When the unit is used with an AC

3. Never use such chemicals as record sprays, antistatic sprays or fluids, benzine or thinner to clean compact discs. Such chemicals could irreparably damage the disc's plastic surface. 4. Discs should be put back in their cases after use to avoid serious scratches that could cause the sound to skip. 5. Do not expose discs to direct sunlight, high humidity, or high temperatures for extended periods of time. Long exposure to high temperatures can warp the disc. 6. Do not stick paper, labels, or t

Silde the FUNCTION selector to TAPE. 2. Insert a cassette tape. 3. Press the. PLAY button. TO STOP PLAYBAC. . Press the. STOP button. TO FAST WIN. . Press the. F.FWD or. REWIND button. . Press the. STOP button to stop winding at the desired position. RECORDIN. USE ONLY NORMAL ( TYPE I ) TAPE FOR RECORDING. 1. Insert a cassette tape. 2. Prepare the source to be recorded and play it. Recording from a C. Recording from the radi. (Refer to using the CD player. ( Refer to radio operation . . Press th

In some cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialty shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line at 1-800-645-4994 . PRE-INSTALLATION CONSIDERATIONS IMPORTANT: Disconnect the ground cable from the negative terminal of the battery. a. Dash