valutazioni - 3, GPA: 3.3
(
)
)
|
Facilità d'uso
• Turn the seat for baby’s comfort. Side-to-Side Head-to-Toe Back View Seat Position • Adjust the seat position for baby’s comfort. • Lift the fabric skirt near the seat back of the frame. Upright: Fasten the liner/pad buckles. Make sure you hear a “click”. Recline: Unfasten the liner/pad buckles. 7 • Place your child in the product. Position the restraint pad between your child’s legs. • Fasten both restraint belts to the buckles on each side of the restraint pad. Make sure you hear a “click” on both sides. • Check to be sure the restraint system is securely attached by pulling it away from your child.The restraint system should remain attached. Restraint Belts Restraint Pad To tighten the belts: Feed the anchored end of the restraint up through the buckle to form a loop . Pull the free end of the restraint . To loosen the belts: Feed the free end of the restraint up through the buckle to form a loop . Enlarge the loop by pulling on the end of the loop toward the buckle. Pull the anchored end of the restraint to shorten the free end of the belt . Please Note: After adjusting the restraint system to fit your child, make sure you pull on it to be sure it is securely fastened. Free End Free End Anchored End TIGHTEN Anchored End LOOSEN Securing Baby • Make sure your child is properly secured in the seat. • Slide the power/speed switch to slow or fast . Hint:. In most cases, the slow setting works best for a smaller child, while the fast setting works best for a larger child. If gliding stops while using the slow setting, try the fast setting. Give the seat a light push to start the gliding motion again. • Be sure to turn this product off when not in use. Slide the power/ speed switch to the off setting . • For best performance, make sure this product is used on a completely level surface. Note: If gliding motion is slow in one direction (and you hear a winding or grinding noise), you may be using this product on an inclined surface. Use this product only on a completely level surface. Power/Speed Switch Starting Gliding Motion 7 • Place your child in the product. Position the restraint pad between your child’s legs. • Fasten both restraint belts to the buckles on each side of the restraint pad. Make sure you hear a “click” on both sides. • Check to be sure the restraint system is securely attached by pulling it away from your child.The restraint system should remain attached. Restraint Belts Restraint Pad To tighten the belts: Feed the anchored end of the restraint up through the buckle to form a loop . Pull the free end of the restraint . To loosen the belts: Feed the free end of the restraint up through the buckle to form a loop . Enlarge the loop by pulling on the end of the loop toward the buckle. Pull the anchored end of the restraint to shorten the free end of the belt . Please Note: After adjusting the restraint system to fit your child, make sure you pull on it to be sure it is securely fastened. Free End Free End Anchored End TIGHTEN Anchored End LOOSEN Securing Baby • Make sure your child is properly secured in the seat. • Slide the power/speed switch to slow or fast . Hint:. In most cases, the slow setting works best for a smaller child, while the fast setting works best for a larger child. If gliding stops while using the slow setting, try the fast setting. Give the seat a light push to start the gliding motion again. • Be sure to turn this product off when not in use. Slide the power/ speed switch to the off setting . • For best performance, make sure this product is used on a completely level surface. Note: If gliding motion is slow in one direction (and you hear a winding or grinding noise), you may be using this product on an inclined surface. Use this product only on a completely level surface. Power/Speed Switch Starting Gliding Motion 8 • Choose the style of music for baby. Slide the music switch to: Soothing Playful Off • Slide the volume switch to for low volume; for high volume. Note: Low battery power may cause this product to operate erratically (no movement/no sounds) and the product may not turn off. If this should happen, remove and discard all batteries and replace with four, new “D” (LR20) alkaline batteries. Music Music Switch Room-to-Room Portability • Make sure your child is properly secured in the glider. • Grasp both handles, as shown, and lift. • Carefully carry the glider to another room. Be sure to set the glider down only on the floor. Care • The liner/pad and headrest pad are machine washable.Wash them separately in cold water on the gentle cycle. Do not use bleach. Tumble dry separately on low heat and remove promptly. • The frame and toy bar may be wiped clean using a mild cleaning solution and a damp cloth. Do not immerse the frame. To remove the liner and headrest pad: • Feed the restraint belts back through the slots in headrest pad. Pull to remove the headrest pad. • Lift the fabric skirt near the footrest of the frame. • Unfasten the liner/pad buckles. Pull to remo...