If it has, please fit it into the hexagonal hole in the retainer so that the rounded side of the lock nut faces out. 6 Shown Actual Size • Fit a retainer with lock nut onto the end of the screw and to the inside of a side rail. • Tighten the screw with a Phillips screwdriver.Do not over-tighten. • Repeat this procedure to fasten the screw in the other end of the front tube and side rail, using the remaining retainer with lock nut. Rounded Side M4 Lock Nut - 2 (Inside Retainer) Retainer with Lock

Adult assembly is required. Tool required for assembly: Phillips screwdriver (not included). Requires one “D” (LR20) alkaline battery (not included) for soother operation; three “D” (LR20) alkaline batteries (not included) for toy bar operation. 2 Warning To prevent serious injury and/or falls: •Never use on any elevated surface, since child’s movement may cause bouncer to slide or tip over. •Never use as a carrier or lift while child is seated. • Always use the restraint system. •Never leave ch

My Little Desk Bed is recommended for children who are at least 15 months old and are ready to progress from a crib to a bed, including being able to get on and off a bed unassisted. Maximum weight: 50 lbs. Tools needed for assembly: Hammer and Two Phillips Screwdrivers. WARNING • Use only a full size crib mattress at least 271/4" (690 mm) by 515/8" (1310 mm) by 5" (127 mm) thick. • Never place bed near windows where cords from blinds or drapes may strangle child. • Regularly inspect bed for dam

Adult assembly is required. Tool required for assembly: Phillips screwdriver (not included). Requires one LR20 (“D”) alkaline battery (not included) in the soothing unit. Requires three LR6 (“AA”) alkaline batteries (not included) in the toy bar. Bouncer Kick & Play Model Number: B8865 IMPORTANT! KEEP FOR FUTURE REFERENCE. Please read these instructions before assembly and use of this product. Adult assembly is required. Tool required for assembly: Phillips screwdriver (not included). Requires o

Remove the screws, re-read and repeat Assembly steps 3 and 4. Assembly 4 8 PULL UP Seat Back Tube Retainer Socket Up Retainer Socket Up • Fit a retainer to the outside of the seat back tube, as shown. Make sure the socket in the retainer is upright. • Insert a screw through the hole in the seat back tube, base wire and into the inside of the retainer. • Tighten the screw with a Phillips screwdriver. Do not over-tighten. • Repeat this procedure to assemble the other retainer to the other side of

Requires one “C” (LR14) alkaline battery (not included) for operation. Use only for a child who is unable to push up on hands and knees, pull up or sit unassisted. Cozy Time™ Bassinet Model Numbers: 79658, 79659 Please keep this instruction sheet for future reference, as it contains important information. Tool needed for assembly: Phillips screwdriver (not included). Requires one “C” (LR14) alkaline battery (not included) for operation. Use only for a child who is unable to push up on hands and

•Never use plastic shipping bags or other plastic film as mattress covers. •To prevent falls, use only for a child who is unable to push up on hands and knees •When used as a infant seat, to prevent falls, always use restraint. •To prevent strangulation: - Never place items with a string, such as hood strings or pacifier cords around - Never place bassinet near a window where cords from blinds or drapes can •The Sit ‘n Soothe Portable Bassinet must be fully erected prior to use. FAILURE TO FOLLO

Maximum weight of child: 26 lbs. ® Important Safety Information • Never use the Deluxe Perfect Support Carrier as an on-the-back carrier. • Never use the facing forward position with a baby who is unable to hold head and shoulders upright unassisted. • Never bicycle or jog with your baby in the Deluxe Perfect Support Carrier. • Make sure all buckles and fasteners are securely fastened. • When stooping down, bend at the knees (not at the waist) to be sure baby stays secure in the Deluxe Perfect S

• Slide the attachment button down to the bottom of the slot. Make sure the attachment button is completely inserted into the slot. 6 Attachment Strap Buckle Free End • Cradle your baby with one arm. • Buckle the attachment strap buckle on each side of the shell and harness. Make sure you hear a “click” when fastening each attachment strap buckle. • Pull on the free end of each attachment strap to adjust the position of your baby for your comfort and the comfort and security of your baby. • Pull

• Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak. • Never short-circuit the battery terminals. • Use only batteries of the same or equivalent type, as recommended. • Do not charge non-rechargeable batteries. • Remove rechargeable batteries from the product before charging. • If removable, rechargeable batteries are used, they are on