STRIKING THE SPINDLE AGAINST WORK MAY DAMAGE THE RECIPROCATING MECHANISM. Fig. 4 Stroke WARNING! To reduce the risk of injury, be sure the blade always extends beyond the shoe and work throughout the stroke. Blades may shatter if they impact the work or shoe (Fig. 4). Impact Protection System Select models are equipped with a unique patented gearing system that provides efficient power transmission and extended life in the most difficult cutting applications. This durable system will absorb impa

Fig 1. Kit Contents (case not shown). Initial Charging The batteries in your new Cordless Screwdriver/Flashlight Kit will not be fully charged when you receive it. To maximize the storage capacity of the be completely discharged (turn and screwdriver on and let until the batteries discharge), then recharge for 10-12 hours. For optimal life span, completely discharge the battery after every use. Follow the instructions below to charge your battery NOTE: The battery does not need to be removed fro

The shear pin drives the outer portion of the drive spindle. If the motor should overload the pin will shear. Extra shear pins are supplied or can be ordered from MK Diamond’s Customer Service. Tighten only enough to remove the play. Do not over tighten. Another model features a friction clutch rather than a shear pin to protect the motor and gears. If the motor overloads the clutch will begin to slip and the bit will stop rotating. The clutch is factory-set and does not require adjustments. How

Due to a lockout mechanism, the control switch can only be adjusted when the ON/OFF switch is not depressed. Always allow the motor to come to a complete stop before using the control switch. Fig. 6 1 3 2 Forward (clockwise) rotation, push the control switch to the left position (1). Check the direction of rotation before use. Reverse (counterclockwise) rotation, push the control switch to the right position (2). Check direction of rotation before use. Locking the trigger, push the control switc