Therefore, either the symbol “ ” or the words and “Double insulation” appear on the power tool or on the nameplate. Although this system has no external grounding, you must still follow the normal electrical safety precautions given in this Instruction Manual, including not using the power tool in wet environments. To keep the double insulation system effective, follow these precautions: a. Only JOHN DEERE AUTHORIZED DEALER should disassemble or assemble this power tool, and only genuine JOHN DE

If using the power tool at a higher voltage than the rated voltage, it will result in abnormally fast motor revolution and may damage the unit and the motor may burn out. 16. NEVER use a tool which is defective or operating abnormally. If the tool appears to be operating unusually, making strange noises, or otherwise appears defective, stop using it immediately and arrange for repairs by an authorized JOHN DEERE DEALER. 17. NEVER leave tool running unattended. Turn power off. Don’t leave tool un

DO NOT USE TOOL WHILE TIRED OR UNDER THE INFLUENCE OF DRUGS, ALCOHOL, OR MEDICATION. A moment of inattention while operating power tools may result in serious personal injury. DRESS PROPERLY. DO NOT WEAR LOOSE CLOTHING OR JEWELRY. CONTAIN LONG HAIR. KEEP YOUR HAIR, CLOTHING AND GLOVES AWAY FROM MOVING PARTS. Loose clothes, jewelry, or long hair can be caught in moving parts. Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plug

NEVER TOUCH THE MOVING PARTS Never touch the moving parts such as blades, bits, cutters and others. CAUTION DON'T FORCE TOOL It will do the job better and safer at the rate from which it was intended. USE RIGHT TOOL Don't force small tool or attachment to do the job of a heavy-duty tool. Don't use tool for purpose not intended - for example - don't use circular saw for cutting tree limbs or logs. DON'T ABUSE CORD Never carry tool by cord or yank it to disconnect from receptacles. Keep cord from

READ OPERATING INSTRUCTIONS Always become familiar with all the instructions and warnings before operating any pneumatic tool. ALWAYS PROVIDE A COPY OF THIS MANUAL TO ANYONE USING THIS EQUIPMENT. READ ALL INSTRUCTIONS BEFORE OPERATING THIS TOOL AND ESPECIALLY POINT OUT THE "SAFETY WARNINGS" TO PREVENT THE POSSIBILITY OF PERSONAL INJURY TO THE OPERATOR. 1/4-Inch Power Ratchet Wrench Operator's Manual ALWAYS WEAR APPROVED EYE PROTECTION Impact resistant eye protection should meet or exceed the sta

Each component has been rigorously tested to ensure the highest level of acceptance. The John Deere Air Hammer is designed for medium duty applications. This tool features a quick change retainer which allows easy replacement of chisels, a heat treated steel piston and barrel for long life, and front exhaust which clears away chipped material. This operator's manual was compiled for your benefit. By reading and following the simple safety, installation, operation, maintenance and troubleshooting

Each component has been rigorously tested to ensure the highest level of acceptance. The John Deere 1/2-Inch Reversible Air Drill is designed for heavy duty applications requiring power and easy operation. Applications include honing, drilling, reaming and wire brushing. Features a convenient side-mounted reverse lever, through handle exhaust and an adjustable side handle. This operator's manual was compiled for your benefit. By reading and following the simple safety, installation, operation, m

Verify tool direction before starting. Do not change direction of tool while tool is running. Do not force tool, allow drill to work at designed pace. 3/8-Inch Reversible Drill Operator's Manual Installation Designed to operate on 90 PSIG, lower pressure (below 90 PSIG) will reduce performance of the tool while higher air pressure (over 90 PSIG) raises the performance of the tool beyond its rated capacity and could cause serious damage to tool and user. Always use clean dry air. Excessive moistu

HEARING PROTECTION IS RECOMMENDED Hearing protection should be used when the noise level exposure equals or exceeds an 8 hour time- weighted average sound level of 85 dBA. Process noise, reflective surfaces, other tools being operated nearby, all add to the noise level present in your work area. If you are unable to determine your noise level exposure, we recommend the use of hearing protection. WEAR RESPIRATORY PROTECTION It is advisable, when using this tool for extended periods of time, to we

The tool should be stored in a clean and dry environment. Recommended lubricants: Use John Deere AT-4003 air tool oil or any other high grade turbine oil containing moisture absorbent, rust inhibitors, metal wetting agents and an EP (extreme pressure) additive. 3/8-Inch Power Ratchet Wrench Operator's Manual Troubleshooting Troubleshooting Loss of Power 1. Low air pressure 2. Improper lubrication or dirt build up 3. Worn motor parts, or other problems 1. Check air supply. For rated performance,