Therefore, either the symbol “ ” or the words and “Double insulation” appear on the power tool or on the nameplate. Although this system has no external grounding, you must still follow the normal electrical safety precautions given in this Instruction Manual, including not using the power tool in wet environments. To keep the double insulation system effective, follow these precautions: a. Only JOHN DEERE AUTHORIZED DEALER should disassemble or assemble this power tool, and only genuine JOHN DE

DO NOT USE TOOL WHILE TIRED OR UNDER THE INFLUENCE OF DRUGS, ALCOHOL, OR MEDICATION. A moment of inattention while operating power tools may result in serious personal injury. DRESS PROPERLY. DO NOT WEAR LOOSE CLOTHING OR JEWELRY. CONTAIN LONG HAIR. KEEP YOUR HAIR, CLOTHING AND GLOVES AWAY FROM MOVING PARTS. Loose clothes, jewelry, or long hair can be caught in moving parts. Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plug

If using the power tool at a higher voltage than the rated voltage, it will result in abnormally fast motor revolution and may damage the unit and the motor may burn out. 16. NEVER use a tool which is defective or operating abnormally. If the tool appears to be operating unusually, making strange noises, or otherwise appears defective, stop using it immediately and arrange for repairs by an authorized JOHN DEERE DEALER. 17. NEVER leave tool running unattended. Turn power off. Don’t leave tool un

For any product believed to be defective within limited warranty, first write or call dealer from whom the product was purchased. Dealer will give additional directions. If unable to resolve satisfactorily, write to the Mi-T-M® Corporation at address below, giving dealer’s name, address, date, and number of dealer’s invoice, and describing the nature of the defect. Title and risk of loss pass to buyer on delivery to common carrier. If product was damaged in transit to you, file claim with carrie

Each component has been rigorously tested to ensure the highest level of acceptance. John Deere 3/8-Inch Butterfly Impact Wrench is used in applications requiring a compact tool. This tool features a swivel inlet with a built in power regulator for convenient power output adjustment, rubber nose piece to prevent damage to the housing when working in close quarters and easy to use butterfly throttle. This operator's manual was compiled for your benefit. By reading and following the simple safety,

- 5:00 p.m. CST Please have the following information available for all service calls: 1. Model Number 2. Serial Number 3. Date and Place of Purchase 3/4-Inch Heavy Duty Impact Wrench Operator's Manual Table of Content INTRODUCTION .................................................................................................... 2 TABLE OF CONTENTS ......................................................................................... 3 SAFETY ................................................

1/2-Inch Heavy Duty Impact Wrench Operator's Manual AVOID PROLONGED EXPOSURE TO VIBRATION Pneumatic tools can vibrate during use. Prolonged exposure to vibration or very repetitive hand and arm movements, can cause injury. Stop using any tool if discomfort, tingling feeling or pain occurs. You should consult your physician before resuming use of the tool. CAUTION 90 PSIG MAXIMUM Designed to operate at an air pressure of 90 pounds per square inch gauge pressure (90 PSIG) maximum, at the tool. Use

Dealer will give additional directions. If unable to resolve satisfactorily, write to the Mi-T-M® Corporation at address below, giving dealer’s name, address, date, and number of dealer’s invoice, and describing the nature of the defect. Title and risk of loss pass to buyer on delivery to common carrier. If product was damaged in transit to you, file claim with carrier. Mi-T-M® Corporation, 8650 Enterprise Drive, Peosta, IA 52068 1-877-JD-KLEEN / (1-877-535-5336) Fax 563-556-1235 Monday - Friday

Process noise, reflective surfaces, other tools being operated nearby, all add to the noise level present in your work area. If you are unable to determine your noise level exposure, we recommend the use of hearing protection. WEAR RESPIRATORY PROTECTION It is advisable, when using this tool for extended periods of time, to wear a protective mask. This will help prevent the inhalation of the fine dust produced while using this tool. Prolonged breathing of dust particles may lead to future respir

READ OPERATING INSTRUCTIONS Always become familiar with all the instructions and warnings before operating any pneumatic tool. ALWAYS PROVIDE A COPY OF THIS MANUAL TO ANYONE USING THIS EQUIPMENT. READ ALL INSTRUCTIONS BEFORE OPERATING THIS TOOL AND ESPECIALLY POINT OUT THE "SAFETY WARNINGS" TO PREVENT THE POSSIBILITY OF PERSONAL INJURY TO THE OPERATOR. 1/4-Inch Power Ratchet Wrench Operator's Manual ALWAYS WEAR APPROVED EYE PROTECTION Impact resistant eye protection should meet or exceed the sta