#1 approximately 70-80 ft./lbs. Torque #2 approximately 80-90 ft./lbs. Torque #3 approximately 90-100 ft./lbs. Torque #4 approximately 100-125 ft./lbs. Torque Line up desired torque # with raised pin Air Inlet Trigger Button Torque Regulator 5- ENG . . Place tool in forward or reverse position. Push button in on “F” side for forward or “R” side for reverse. . Depress the trigger to operate tool. . Release trigger to stop tool. . Always disconnect air supply when changing sockets. Push button all

IMPORTANTE Asegurese de que la persona que va a usar esta herramienta lea cuidadosamente y comprenda estas instrucciones antes de empezar a operarla. IMPORTANT Veuillez vous assurer que la personne qui utilise cet outil lit attentivement et comprend ces instructions avant de commencer a utiliser l'outil. Part No. D22725-028-4 SAFETY GUIDELINES - DEFINITIONS This manual contains indicates an imminently hazardous situation which, if not information that is avoided, will result in death or serious

• Always wear proper fitting clothing and other safety equipment when using this tool. HAZARD RISK OF CUT OR BURNS WHAT COULD HAPPEN HOW TO PREVENT IT • Tools which cut, shear, drill, staple, punch, chisel, etc. are capable of causing serious injury. • Keep the working part of the tool away from hands and body. . 4- ENG SPECIFICATIONS Maximum Torque 500 ft./lbs Blows Per Minute 1,000 Maximum Working Pressure 90 PSI Air Inlet 1/4” NPT Recommended Hose Size 3/8” I.D. Air Consumption @ 90 PSI 4.2 S