valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
(Fig. 18) 9 50 175 150 200 300 250 125 0 100 75 50 50 175 150 200 300 250 125 0 100 75 50 Fig. 17 Fig. 18 3. Operation 3.1 Overview Inserting the baking tray – Insert the baking tray at the same height on both sides. – Make sure that the notch on the baking tray is at the rear or that the handle is at the front. Switching on Fig. 19 Switching off Fig. 20 “Temperature" knob: The temperature can be set within the range from 50-300°C. “Mode" knob: You can choose from 8 programs: – Hot air circulation – Grilling with the hot air fan – Grilling – Hot air circulation with bottom heat – ECO – Top and bottom heat – Top heat – Baking stone operation Switching on: (Fig. 19) Actuate the “Temperature" control knob to operate the appliance. You can set any temperature by turning the “Temperature" control knob to the right. The control knob has latching positions. The first latching position on the right is the lighting level. Switching off: (Fig. 20) To switch off, turn the “Temperature" control knob to the 0 position. The lighting goes off and now only the current time of day appears on the display. Note: after switching off the oven, the cooling fan will continue to run for a time to protect the electronics and will then switch off automatically. 3.2 Operating the timer The required mode and temperature can be set before and after time programming by turning the “Temperature" or “Mode" knob. As long as one or several symbol(s) in the display flash(es), no input is possible and no value is programmed or an invalid value has been programmed. All time values are entered by means of the (Timer), +, – and (Confirmation) keys. Every input triggers an audible and a visible signal. If you select a program (e.g. end), but you do not enter a value, the current time will appear on the display after 20 seconds. An entered value (e.g. duration programming) must be confirmed within 20 seconds (Confirmation key). Entered values are not stored if they are not confirmed. Press the (Confirmation) key if you wish to confirm a value during programming. If you press any other key instead, the entered value will not be stored and will disappear. You can query set values by pressing the (Timer) key. The value appears on the display for around 10 seconds. During this time, you can modify the value by pressing the + or – key and you can confirm it by pressing the (Confirmation) key. Press the + and – keys at the same time if you wish to clear a value. If you have already programmed a time value once (e.g. a duration) on the appliance, this previously programmed value will be proposed to you when programming a value again. The longer you press the + or – key when programming a time, the faster the time elapses on the display. After the programmed time has elapsed, the corresponding symbol flashes on the display. For example, if you have programmed an end time, the (End time) symbol will flash. An audible signal is also sounded. Heating is deactivated and the oven lighting goes off. You can restart the previously selected mode by pressing any key on the display. You end the baking process by turning the “Temperature" knob to 0. Switching from the automatic mode to the “normal mode": T urn the temperature control knob back to 0. The oven will then no longer heat. The previously programmed time value is retained. An audible signal sounds after the entered time has elapsed. Note: if the time is not displayed accurately on the timer, this is not due to a technical defect. The mains frequency of the public power supply is the time base for the timers. In Europe, this is a standard frequency of 50 Hz (Hertz). As far as this point is concerned, power supply networks that are fed from power stations in eastern Europe fluctuate. This is why an incorrect time may be displayed. This discrepancy has no influence on the functions and program sequences of the appliance. Every alarm goes off after 3 minutes. Note: all time programming functions can be programmed simultaneously. Setting the time of day Proceed as follows: – Press the unit) symbol flashes on the displayThe time display shows the currently set time of day (Fig. 21). – You can select the required time by pressing the + or – keyFig. 21 3x Fig. 21 3x (Timer) key 3 times. The (Time . . – Press the (Confirmation) key to confirm the entered value. An audible signal is sounded. Note: After a new connection or a power failure, the suggested time of 8:00 lights up on the display and the symbol (Time unit) flashes. By pressing the + and – keys, you can set the current time and you can confirm it by pressing the (Confirmation) key. This will ensure perfect functioning of the appliance. The suggested time 8:00 will be stored as the time of day if you turn one of the control knobs. Fig. 22 Fig. 22 The last programmed value is proposed to you every other time you program a short time. Fig. 23 Short time You can program a period of time with the short time function without automatic activation or deactivation....
Questo manuale è adatto anche per i modelli :Forni - EB211900/04 (2.17 mb)
Forni - EB211900/11 (2.17 mb)
Forni - EB211930/03 (2.17 mb)
Forni - EB211930/04 (2.17 mb)