valutazioni - 3, GPA: 4
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
330 min. Approx. 270 min. • Time required to charge a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer under certain circumstances or conditions. • Connect the battery charger to an easily accessible wall outlet (wall socket) close by. • Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket). • When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger. • Designed for use with compatible Sony batteries. 2 Inserting the battery pack/a “Memory Stick Duo” (not supplied) 2121Insert the “Memory Stick Duo” with the terminal side facing the lens. Battery eject lever Battery/“Memory Stick Duo” cover Insert the battery pack while pressing the battery eject lever with the tip of the battery pack. 1Open the battery/“Memory Stick Duo” cover. 2Insert the “Memory Stick Duo” (not supplied) all the way in until it clicks. 3Insert the battery pack in the correct direction. 4Close the battery/“Memory Stick Duo” cover. [ When there is no “Memory Stick Duo” inserted The camera records/plays back images using the internal memory (approx. 25 MB). [ To check the remaining battery time Press POWER button to turn on and check the remaining battery on the LCD screen. Battery remaining indicator Battery remaining guidelines Sufficient power remaining Battery half full Battery low, recording/ playback will stop soon. Change the battery with fully charged one, or charge the battery. (The warning indicator flashes.) • It takes about one minute until the correct battery remaining indicator appears. • The displayed battery remaining indicator may not be correct under certain circumstances. • The Clock Set screen appears when the camera is turned on for the first time (page 12). [ To remove the battery pack/“Memory Stick Duo” Open the battery/“Memory Stick Duo” cover. “Memory Stick Duo”Battery pack Make sure that the access lamp is not lit, then push the “Memory Stick Duo” in once. Slide the battery eject lever. • Be sure not to drop the battery pack. • Never remove the battery pack when the access lamp is lit. 3 Operating the touch panel Mode switch Touch panel (on-screen key) button 1Press (on-screen key) to display the touch panel buttons. • When the mode switch is set to , skip this operation. 2Lightly touch the buttons on the screen with your finger. • Press (on-screen key) again to turn off the touch panel buttons. • When the item you want to set is not on the screen, touch v/V to change the page. • You can return to the previous screen by touching . 4 Turning the camera on/setting the clock POWER button Mode switch Touch panel 1Select with the mode switch, then press the POWER button. 2Set the clock by touching the buttons on the screen. 1 Touch the desired date display format, then t. The Clock Set 2/2 screen appears. 2 Touch the item to be set, then set the numeric value with v/V. 3 Touch [OK]. [ To change the date and time Select [Clock Set] in the (Setup) screen (page 20). [ When you turn on the power • Unless you set the clock, the Clock Set screen appears each time the camera is turned on. • If the camera is running on battery power and you do not operate the camera for about three minutes, the camera turns off automatically to prevent wearing down the battery pack (Auto power-off function). Shooting images easily 1Select a mode with the mode switch. Still image: Select . Movie: Select . 2Hold the camera steadily, keeping your arms at your side. Microphone Mode switch (Screen display switch) button Tripod receptacle (bottom) Shutter button (on-screen key) button Zoom (W/T) button Touch panel Position the subject in the center of the focus frame. Do not cover the microphone with your finger. 3Shoot with the shutter button. When shooting images during displayed on the screen, those minimized copies of the original images can be saved in the Album. Still image: AE/AF lock indicator 1 Press and hold the shutter button halfway down to focus. The z (AE/AF lock) indicator (green) flashes, a beep sounds, the indicator stops flashing and remains lit. 2 Press the shutter button fully down. Movie: Press the shutter button fully down. To stop recording, press the shutter button fully down again. [ Using the zoom Press the zoom button. • When the zoom scale exceeds 3., the camera uses the Digital Zoom function. • You cannot change the zoom scale while shooting a movie. To select the following functions, press the (on-screen key). [ Flash (Selecting a flash mode for still images) Touch on the screen. Touch the desired item, then . Auto: Flash Auto Strobes when there is insufficient light or backlight (default setting) Forcedflash ( ): Flash forced on S...