valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
1 Set the power switch to “IR LIGHT.” 2 Slide the NIGHTSHOT (PLUS) switch on the camcorder to “ON.” The LED on the side of the video IR light lights up 3 View the picture in the viewfinder or on the LCD screen, and adjust the brightness by sliding the changeover switchB. The brightness can be adjusted in three stages. Tips • When you set “NS LIGHT” to “ON” in the menu system of the camcorder, the built-in IR light of the camcorder will also light up. • The distance between the IR light and the subject in the dark should be from about 2 m (6 1/2 ft) or more. When the subject is too close, IR light cannot light the subject completely. Since the recording distance will differ depending on the environment, be sure to check the brightness of the picture in step 3 before you start recording. • When you set “SUPER NS (PLUS)” to “ON,” the recording distance will lengthen. Notes on IR light • The picture recorded with the IR light is nearly monochrome. • IR light is invisible because it is infrared lighting. The emitting section may turn red. After use Set the power switch to “OFF.” C Using the video light To turn on the video light automatically in a dark place 1 Set the power switch to “AUTO.” 2 Set the camcorder to standby mode. The video light turns on automatically when using the camcorder in a dark place. In “AUTO” mode, the video light is turned off automatically after about 5 minutes even during recording. To turn off the video light when the light is on, switch the camcorder to “OFF (CHG),” or set the video light to “OFF.” To turn on the video light for the entire recording time, switch the video light to “LIGHT.” To control the video light with the camcorder in standby mode 1 Set the power switch to “LIGHT.” 2 Set the camcorder to standby mode. The video light is turned on in sync with the camcorder. To turn off the video light, switch the camcorder to “OFF (CHG),” or switch the video light to “OFF.” After use Set the power switch to “OFF.” Notes • The battery discharges while the camcorder is in standby mode. Be sure to switch from standby to “OFF (CHG).” • Store in pouch when not in use. • Make sure the video light has cooled down before storing it. D Lighting up a subject • When recording indoors with this unit, you can get clear and beautiful color pictures. • For wide angle shots, the video light may not light the corners of pictures completely. Use the video light for shooting the main subject of the picture effectively. • Fluorescent lights tend to produce flickering in the recording. Use of the video light may help to produce better pictures with less color blur. E Replacing the lamp Use the Sony XB-3L xenon lamp. Consult your Sony dealer or local authorized Sony service facility for replacement of xenon lamp XB-3L. Order the following parts number when purchasing the xenon lamp : A- 1099-823-s. The lamp is hot when it has just burned out. Wait until the lamp cools down before removing it. 1 Remove the front cover by inserting something like a coin after making sure that the unit is cool enough to handle. 2 Replace the lamp. 1 Cover the old lamp with the tube supplied with the new lamp for replacement and pull the tube out to replace the old lamp. 2 Insert the new lamp into the socket straightly. *Do not tilt the lamp. 3 Insert the pawls on the front cover and attach it. Notes • The lamp is hot when it has just burned out. Make sure that the lamp is cool enough to handle. • To prevent the lamp from being smudged with fingerprints, handle it with a dry cloth. If the lamp is smudged, wipe it completely clean. A ...IR... Video IR Light Lampe video IR ©2005 Sony Corporation Printed in Japan HVL-HIRL 2-588-493-04 (1) ............................. ........... .................................... .................................... .................................... 1 3 4 2 1 A 2 B 3 C D E 1 2 B AUTO LIGHT MAX MIN IR LIGHT OFF AUTO LIGHT MAX MIN IR LIGHT OFF AUTO LIGHT MAX MIN IR LIGHT OFF ... .............(.).................... ..................................... ..................................... ...... ...................................... ...................................... ................ • ............. • ....................... • .......... 1............ 2............. m........ ....... ............................ ................... ....... .................................... ........... ....... ............................ ........................... .. ......... .............. ................. ..... ........... ........................ ........................ ........OFF......... ....................... ..............................ON.. ....................... .................. .................................. ........................ .............. ........... ......... ........................ ................... ........... ................. ................ .............................. .............. .............. ..... ...................... ...........................