|
Facilità d'uso
Maximum cooking time is 11 hours and 50 minutes (minimum cooking time is 1 minute). The display will return to the time of the day with the word DELAY appearing to the left of the day, as shown in Figure 11. 10. When the start time is reached the indicator word COOK will appear in the display with the set cook time. At the end of the programmed cook time the oven will shut-off automatically. The indicator word COOK will blink and three (3) “beeps” will be heard. The oven will continue to “beep” every 10 seconds until any button is depressed. 13 Be sure to turn the Mode Selector knob and the Temperature knob to their Off positions after the programmed cooking has been completed. To Check Start Time/before cooking begins Depress Start Time button. The start time will be displayed briefly and then the display will return to time of day. To Change Start Time/before Cooking begins Depress Start Time button. A “beep” will sound and the display will show SET - START - TIME on the right hand side of the display. Then press either the plus (+) or minus (-) button to the right of the display, to set the timer to the start time desired. After the time has been entered a “beep” will be heard and the indicator words DELAY-STARTTIME will appear briefly and then the display will return to time of day with the word DELAY appearing to the left of the time of day, as shown Figure 11. To Check Cook Time Depress Cook Time button. The cook time will be displayed briefly, then the display will return to on-going program. To Change Cook Time Depress Cook Time button. A “beep” will sound and the display will show SET - COOK - TIME on the right hand side of the display, see Figure 8. Then press either the plus (+) or minus (-) button, to the right of the display, to set the timer to the time interval desired. Maximum cooking time is 11 hours and 50 minutes (minimum cooking time is 1 minute). To Cancel Delay Start Depress Start Time button twice. To Cancel Cook Time Depress Cook Time button twice. 14 Care & Cleaning The Bosch line of ovens feature a pyrolytic selfcleaning function that eliminates the difficult and time consuming manual scrubbing of the oven interior. During self-cleaning the oven uses very high temperature (approx. 850°F) to burn away soil and grease. The fumes produced during this function of the oven are then filtered and expelled. You will note however that a powder ash residue will be left on the bottom of the oven after completion of self cleaning. Once the oven has cooled sufficiently the residue may be removed using a damp cloth or sponge. See the following instruction on use of the self clean function. WARNING Make sure all controls are Off and the oven is cool before cleaning. Failure to do so can result in burns or electrical shock. For parts of the oven other than the oven cavity the following cleaning methods are recommended: • Control Panel Use warm soapy water or spray glass cleaner to clean the control panel. With a soft cloth or sponge wash, rinse and dry the control panel thoroughly. DO NOT use abrasive cleaners or steel wool pads. These will damage the surface. • Stainless Steel To clean, use a standard cleaner designed for stainless steel such as: Cameo®, Bar Keepers Friend® or Bon-Ami®. Follow manufacture instructions. When clean, a polish such as Twinkle® or Stainless Steel Magic® can be applied. DO NOT USE ABRASIVE MATERIALS SUCH AS STEEL WOOL OR ROUGH SPONGES. IT WILL SCRATCH THE SURFACE. • Front of Oven Door(s) and Handle(s) Use warm soapy water or spray glass cleaner to clean the glass door surface. With a soft cloth or sponge wash, rinse and dry the door front(s) and handle(s) thoroughly. DO NOT use abrasive cleaners or steel wool pads. These will damage the surface. • Broiler Pan and Rack(s) Use warm soapy water. With a steel wool pad wash, rinse and thoroughly dry the pan and/or rack(s). DO NOT clean the broiler pans or racks by leaving them in the oven when running the Self Clean function. • Frame Outside Door Gasket Area Make sure oven is cool, then use warm soapy water. With a non-abrasive, plastic scrubbing pad clean the frame surface outside the door gasket area. This area must be cleaned by hand because the area outside the gasket does not get hot enough to burn off the soil (see Figure 12). • Door Outside gasket Area Make sure oven is cool, then use warm soapy water. With a non-abrasive, plastic scrubbing pad clean the area outside the door gasket area. This area must be cleaned by hand because the area outside the gasket does not get hot enough to burn off the soil (see Figure 12). Using the Self Clean Function The Self Clean function is a timed function and therefore is used just as if using the oven in Immediate Start/Automatic Shut-Off or Delayed Start/Automatic Shut-Off. There are a few preparations that must be made however as well as some post function clean-up that you will find described below: 1. Before using Self Clean be sure to r...
Questo manuale è adatto anche per i modelli :Forni elettrici - 45 (926.63 kb)
Forni elettrici - 44 (926.63 kb)
Forni elettrici - 46 (926.63 kb)
Forni elettrici - HBL 43 (926.63 kb)