SECTION 3 - OPERATION III. QUICK REFERENCE: DIGITAL TEMPERATURE CONTROLLER Display "HEAT ON" Shows the Set Point Light or the Actual Tem- Lights when the perature in degrees burner is in ENGLISH "SP LOCK" Light Lights when the set point is locked out from changes. This setting can only be changed by service personnel. OVERTEMP Light Lights when the oven temperature is greater than 650°F (343°C). Refer to Quick Reference: Troubleshooting in this section. Temperature Key Press this key once to vie

2. Push to choose. 3. Mini- Knob 1. Push and hold at the same time to enter/exit SF. Push to enter choice . in the display, indicating that the oven is baking/roasting. The Timed cooking feature may be used in Sabbath Mode. To use the Timed cooking feature, set the Cook Time and the temperature before entering the Special Features mode and selecting SAbbAth. The Delay start feature cannot be used in Sabbath mode. 3 Push the Mini-Knob to enter your choice. 4 Push and hold the Mini-Knob for 5 seco

NOTE: The Mini-Knob must be pushed for the self-clean cycle to be set. Push the DELAY START button. The current time of day will flash in the display. On double oven models, push the DELAY START button once to set the upper oven and twice to set the lower oven. Turn the Mini-Knob to select and push it to enter the time of day you want the oven to turn on and start cleaning. NOTE: The Mini-Knob must be pushed for the self-clean cycle to be set to start at the time of day entered. The oven is now

Remove the probe from the oven. • Improper rack position being used. • Food is being cooked in a hot pan. Use the broiling pan and grid that came with your oven. • Cookware is not suited for broiling. Use the broiling pan and grid that came with your oven. • Aluminum foil used on the broiling pan and grid has not been fitted properly and slit as recommended. • In some areas the power (voltage) may be low. Preheat the broil element for approximately 10 to 15 minutes. OVEN WILL NOT • The oven temp

Manual del propietario ZET1P – Horno de pared simple ZET1S – Horno de pared simple ZET2P – Horno de pared doble ZET2P – Horno de pared doble La seccion en espanol empieza en la pagina 91 49-80434-1 09-08 JR Printed in the United States monogram.com Introduction Contents Remove packaging tape Care and Cleaning Broiler Pan and Grid . . . . . . . . . . . . . . . . . .33 Oven Door . . . . . . . . . . . . . . . . . . . . . . . .35, 37 Oven Lights . . . . . . . . . . . . . . . . . . . . . . . . .36 Pr

Tighten after adjustment (See VIEW A) VIEW A Gas Hose Socket Quick Connect Socket Plug IMPORTANT: Cable restraint should be fastened as close aspossible toflexible connector and short enough to prevent any strain on flexible connect. At maximum stretch of shortened restraint the flexible connector should be easy to install and quick connect. Gas Supply Line Attachment Plate (2 supplied) 1 for wall mount 1 for leg bolt Note: fastener for wall mount not supplied Attachment Plate (secure with leg m

Blodgett Corporation IMPORTANT WARNING: IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT AVERTISSEMENT: UNE INSTALLATION, UN AJUSTEMENT, UNE ALTERATION, UN SERVICE OU UN ENTRETIEN NON CONFORME AUX NORMES PEUT CAUSER DES DOMMAGES A LA PROPRIETE, DES BLESSURES OU LA MORT. LISEZ ATTENTIVEMENT LES DIRECTIVES D’INSTALLA

DONOTINSTALLANADDITIONALREGULATORWHERETHEOVENCONNECTSTOTHEGASSUPPLYUNLESSTHESUPPLYEXCEEDSTHEMAXIMUM. NOTE:Themaximumgassupplypressuretotheovenis10.5”W.C.(2.61kPa).Theminimumgassupplypressuretotheovenis4.5” W.C.(1.1kPa). Installationmustconformwithlocalcodes,orintheabsenceoflocalcodes,withtheNationalFuelGasCode,NFPA54/ANSIZ223.1---LatestEdition, theNaturalGasInstallationCodeCAN/CGAB149.1orthePropaneInstallationCode, CAN/ CGA-B149.2asapplicable. Theovenanditsindividualshutoffvalvemustbedisconnecte

3 Fully open the door. If the doo_ will not hilly open, the indentation is not seated correctly in the bottom edge of the slot. 4 Push the hinge locks up against the front fl'ame of the oven cavity, to the locked position. 5 (;lose the oven door. Slot d_b Hinge lock Pull hinge locks down to unlock Bottom earm edgeof Indentation Hinge..._/! lock //I Push hinge locks up to lock _PYobg The temperature probe may be cleaned with soap and water or a soap-filled scouring pad. Cool the teml)eramre probe