valutazioni - 3, GPA: 4 ( )

Produttore : Panasonic File Size : 264.53 kb File Nome : ES4025.PDF Lingua di insegnamento:

2) Switch the shaver off and set it firmly into the charging adaptor. Keep the adaptor level. Plug the adaptor into an AC outlet. The charge indicator lamp will glow red and it will stay on until the shaver is removed from the adaptor. You can fully charge the shaver in 8 hours if it seems to be losing speed. A full charge will supply enough power for about 7 shaves (3 minutes per shave for a normal beard). Before traveling, charge it fully for 8 hours if you will not be taking the charging adaptor with you. For a better shave Put a thin layer of shaving foam on your face which works as a lubricant. Shaving foam is the most suitable among many other shaving aids (gel, soap, cream, etc.). Do not put a thick layer of shaving foam as it may affect the shaver’s performance. If the shaving head is clogged with foam, simply rinse it under running water. Depress the switch lock button and slide the On/Off switch upward to turn the shaver on. Hold the shaver at a right angle (90° ) to your skin (see fig. 3). Start out shaving by applying gentle pressure to your face. Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard. You may gently increase the amount of pressure 6 as your skin to this shaver. Applying excessive pressure does a closer shave. Using the trimmer (see fig. 4) Slide the trimmer handle up until it clicks in. Place the trimmer at a right angle to your skin and move it downward to trim sideburns. Cleaning your shaver (see fig. 5) For cleanliness and convenience, we recommend that you clean your shaver with water and a liquid hand soap. Regular cleaning will keep your shaver in good condition while preventing odors or bacteria from developing, and maintain the cutting performance. With the outer foil in place, apply some hand soap onto the outer foil. Turn the shaver on and pour some water over the outer foil. After about 10-20 seconds, turn the shaver off. Remove the outer foil and clean it with running water. Wipe off any moisture from the shaver with a dry cloth and remove the protective cap to allow the outer foil to dry completely. Replacing shaving head components It is recommended that you replace the outer foil at least every year and the inner blade at least every 2 years to maintain shaver’s cutting performance. Replacing the (see fig. 6) Squeeze the outer foil release buttons and lift the outer foil upward to remove it. To insert the new outer foil, press down until it snaps into place. Replacing the inner blades (see fig. 7) Squeeze the foil frame release buttons and lift the foil frame upward to remove it. Remove the inner blades, one at a time, by grasping them firmly at both ends and pulling straight away from the shaver. To insert the new inner blades, hold the blades, one at a time, at both ends and press downward until they snap into place. ATTENTION: A nickel cadmium battery that is recyclable powers the product you have purchased. At the end of it’s useful life, under various state and local laws, it is illegal to dispose of this battery into your municipal waste stream. Please call 1-800-8-BATTERY for information on how to recycle this battery. 7 How to remove the built-in rechargeable battery (s) before disposal of (see fig. 8) The battery (s) in this shaver is not intended to be replaced consumers. However, the battery (s) may be replaced at an authorized service center. The procedure described below is intended only for removal of the rechargeable battery (s) for the purpose of proper disposal. WARNING: Do not attempt to replace the battery (s) for the purpose of reusing the shaver. This could result in the risk of fire or electric shock. 1. Remove the protective cap, outer foil frame and inner blades. 2. Remove the 2 screws (a) on the top. 3. Grasp the bottom of the unit and the button area (b) located on the left and right, and pull the button area away from the main unit. 4. Remove the 2 screws (c) located inside the main unit’s case. 5. Grasp the top part (d) and bottom part (e) of the main unit, and pull them both out. 6. Remove the battery (f) from the chassis. Caution • Do not charge the shaver where the temperature is below 0° C (32° F) or above 40° C (104° F), where it will be exposed to direct sunlight or a heat source, or where there is a lot of moisture. • Use only shaver charging adaptor the ES4025/ES4026/shaver. • Dry the shaver completely before setting it in the charging • Keep the charging adaptor away from water and handle it only with dry hands. Do not use an extension cord to connect the charging adaptor to an outlet. • The shaver may not immediately begin to charge after being placed into the charging adaptor after use. Allow the shaver to sit in the charging adaptor for a few minutes and check again to make sure that it is being charged. • The outer foil is very thin. If handled improperly, it can be easily damaged. To avoid personal injury, do not use the shaver if it has a damaged foil or inner blades. • Wa...

Scarica la tua

Per scaricare, digitare 2 cifre :