Log:
valutazioni - 0, GPA: 0 ( )

Istruzioni per l'uso Philips, Modello HD7835/11

Produttore : Philips
File Size : 6.7 mb
File Nome :
Lingua di insegnamento: enfrdenl
Vai a scaricare



Facilità d'uso


Never interrupt the flushing cycle halfway. If you do, the boiler does not fill itself properly. The light ring around the on/off button starts flashing to indicate that , the flushing cycle has started.The flushing cycle takes approx. 1.5 to 2.5 minutes. During the flushing cycle, the boiler fills itself with water from the , water reservoir and cold water comes out of the coffee spout. During the flushing cycle, the machine produces more noise than during a regular brewing cycle. When all the water in the water reservoir has been used up, the , flushing cycle is finished and the machine switches off. 9 Clean the coffee spout, the coffee collector and the pod holders with hot water and some washing-up liquid or in the dishwasher. Clean the water reservoir thoroughly in hot water, if necessary with some washing-up liquid, or in the dishwasher. now your Philips sEnsEO® coffee machine is ready for use. Note: If the machine does not work, repeat steps 1-8. Do not interrupt the flushing cycle. Brewing SENSEO® coffee tips for the best sEnsEO® quality -Use fresh water ever y time. -Use the SENSEO® coffee pods that have been specially developed by Douwe Egber ts for your SENSEO® coffee machine for a full, round taste.The Douwe Egber ts SENSEO® coffee pods stay fresh longer if you store them in an air tight storage container. -To make sure that the coffee always tastes optimally, rinse the pod holders, the coffee collector and the coffee spout regularly. -The SENSEO® coffee tastes best if you stir it before you drink it. EnglisH 11 -If you have not used the coffee machine for some time, flush the machine before you use it again (see section ‘Flushing the coffee machine’ in chapter ‘Cleaning the machine’) with fresh water before you use it again. -If you intend to make another cup of SENSEO® coffee later, just leave the coffee machine switched on.The machine automatically switches off after 30 minutes. Filling the water reservoir 1 Fill the water reservoir with cold water up to the MaX indication and put it back onto the machine. Never pour milk, coffee, hot water or carbonated water into the water reservoir. The MIN indication on the water reservoir indicates the minimum amount of water required for brewing coffee. Always fill the water reservoir beyond the MIN level. Switching on the machine 1 2 Put the plug in an earthed wall socket. Press the on/off button 3. The light ring flashes slowly while the water heats up. Heating up , takes approx. 75 seconds. The coffee machine is ready for use when the light ring lights up , continuously. Note: If the light ring flashes rapidly, the water reservoir does not contain enough water for brewing one cup of coffee. Placing a pod holder 1 Release the lid by moving the lever upwards. The lid opens automatically. ,2 Place the appropriate pod holder in the machine. Note: Make sure the pod holder is clean and the sieve in the centre is not clogged, e.g. with loose coffee grounds. 12 EnglisH -If you want to make one cup of SENSEO® coffee, use 1 coffee pod in combination with the 1-cup pod holder qand the 1- cup button q. -If you want to make two cups of SENSEO coffee, use 2 coffee pods in combination with the deeper 2-cup pod holder qqand the 2-cup button qq. Placing one or two pods 1 Place the SENSEO® coffee pod(s) properly in the centre of the pod holder, with the convex side pointing downwards. Note: Use SENSEO® coffee pods from Douwe Egberts specially designed for your SENSEO® coffee machine for a full and round taste. Note: Make sure the coffee in the pod(s) is evenly distributed and press the pod(s) lightly into the pod holder. Note: Never put normal ground coffee or use torn pods in the SENSEO® machine, as this causes it to become blocked. -Place 1 SENSEO® coffee pod in the 1-cup pod holder q. -Place 2 SENSEO® coffee pods in the 2-cup pod holder qq. 2 Close the lid and lock the lever. It is not possible to brew coffee when the lid is not properly closed and the lid lever is not locked. In this case, the light ring around the on/off button flashes intermittently. EnglisH 13 Selecting the desired coffee strength 1 Select the desired coffee strength (strong, normal or mild) by pressing the Strength Select button. By varying the strength, you also increase or decrease the amount of coffee in the cup. -Select e for a small cup (60ml) of strong coffee. -Select d for a medium cup (125ml) of normal coffee. -Select c for a large cup (145ml) of mild coffee. Brewing coffee 1 Place one cup or two cups under the spout openings.You can adjust the height of the coffee spout by sliding it upwards or downwards. Note:The cups you use should have a capacity of at least 100ml when you brew strong coffee e, 150ml when you brew normal coffee dand 170ml when you brew mild coffee c. Do not use cups that are too large, as they cause the coffee to get cold more quickly. 2 Press the button indicating the number of cups of SENSEO® coffee you want to brew. -Press the 1-cup button q for one cup. -Press ...

Questo manuale è adatto anche per i modelli :
Macchine da caffè - HD7835/10 (6.7 mb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie