Single channel memory configuration allow maximum flexibility: Additional memory can be configured as single memory modules. Dual channel memory configurations for maximum performance: For optimum performance memory has to be configured in pairs of memory modules with identical size. S26361-F3372-E413 S26361-F3372-E414 Main memory 1GB ECC Main memory 2GB ECC DDR2 800/PC2-6400 unbuffered DDR2 800/PC2-6400 unbuffered consisting of one module consisting of one module max. 4x per system max. 4x per

description (Ger/US) 1" * 3.5", anthracite bezel max. 1x per system S26361-F3148-E1 DVD-RW 16x super multi drive all formats, DUAL/DL, DVD-RAM incl. description (Ger/US) only W2K, W3K and Linux 1.6 x 5.25", anthracite bezel 1.6 x 5.25", anthracite bezel max. 2x per system max. 1x per system S26361-F3157-E3 Tape drive LTO2HH Ultrium 200GB, 24MB/s, U160 SCSI Connector: HD68 without cable incl. description (Ger/US) data and cleaning cartridge 1.6 * 5.25", anthracite bezel max. 1x per system S26361-

Please check for the recent update on your product. Fujitsu Welcomes Your Comments If you have any comments or requests regarding this document, or if you find any unclear statements in the document, please state your points specifically on the form at the following URL. For Users in U.S.A., Canada, and Mexico: (https://download.computers.us.fujitsu.com/) For Users in Other Countries: ( ml) x SPARC Enterprise T5120 and T5220 Servers Site Planning Guide • July 2009 SPARC Enterprise T5120

Since the boot device always has a mounted file system when booted, an alternate boot medium must be employed, and the volume created in that environment. One alternate medium is a network installation image in single-user mode. (Refer to the Solaris 10 Installation Guide for information about configuring and using network-based installations.) 1. Determine which disk is the default boot device. From the OpenBoot ok prompt, type the printenv command, and if necessary the devalias command, to i

DIMMs in group B are optional. ¦ For both groups, DIMMs must be of the same capacity and rank within a group. DIMMs of different capacity cannot be mixed in a group. 12 SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1041 • October 2007 Software Issues Software Issues XCP Issues and Workarounds TABLE 5 lists known XCP issues and possible workarounds. TABLE 5 XCP Issues and Workarounds ID Description Workaround RTIF1070418- 004 RTIF1070418- 005 RTIF1070418- 009 RTIF1070418- 010

Use the setrcic command at the setting of the facility control. For details on the facility control, contact authorized service personnel. • Power-on wait The power-on wait function automatically powers on RCI I/O units before powering on RCI hosts. To use this function in a domain, execute the setpowerupdelay command in the domain. For details, see the XSCF Reference Manual. • Asynchronous RCI monitoring The following functions are available when the asynchronous RCI monitoring function is enab

The following topics are covered: “SPARC Enterprise T5440 Server” on page 1 “Features at a Glance” on page 2 “Additional Feature Information” on page 4 SPARC Enterprise T5440 Server The SPARC Enterprise T5440 server (FIGURE 1) is a scalable, reliable, high-performance server, optimized for enterprise data centers. This server offers the following key features: Up to four UltraSPARC® T2 Plus multicore, multithreaded, processors with CoolThreads technology for high throughput and energy savings. T

You can use this command if the system is powered off. setrci -c set [host_no] Sets up an RCI Host node. Before this command can be executed, the RCI settings must already have been initialized. host_noAF Integer numbers from 1 to 32 are assigned in this order. setrci -c initconfig Assigns an RCI address to an I/O unit connected via RCI. Before this command can be executed, the RCI Host node settings must already have been made. setrci -c addconfig Makes the RCI settings for the case that a host

875-4324-10 February 2008, Revision A Copyright 2008 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. Copyright 2008 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. Sun Microsystems, Inc. and Fujitsu Limited each own or control intellectual property rights relating to products and technology described in this document, and such products, technology and this document are protected by cop

The Fault Manager runs in the background on each server. It records, in the error log, faults detected by the XSCF, and initiates proactive self-healing activities, such as disabling faulty components. The Fault Manager maintains two sets of logs for use by system administrators and service personnel: Error log Records error telemetry, the symptoms of problems detected by the system Fault log Records fault diagnosis information; the problems believed to explain these symptoms. By default, f