valutazioni - 5, GPA: 4.2 ( )

Produttore : Bosch File Size : 22.82 mb File Nome : Lingua di insegnamento:

cake mixture Whisk (14) for whisking egg whites, cream and light dough, e.g. sponge mixture Kneading hook (15) for kneading heavy dough and mixing-in ingredients that ought not be cut (e.g. raisins and chocolate chips) Working with the bowl and the tools Fig. S • Press the Release button and move the swivel arm to position 2. • Insert the bowl: - Tilt the bowl forwards and then set it down, - turn anti-clockwise until it locks into place. • Depending on the processing task, insert the stirrer, whisk or kneading hook until it locks into position. Note: If using the kneading hook, rotate the dough deflector until the kneading hook can lock into position (Fig. S-4b). • Put the ingredients to be processed into the bowl. • Press the Release button and move the swivel arm to position 1 . • Attach the cover. • Set the rotary switch to the desired setting. Our recommendation: - Stirrer: first stir in at setting 1 (1), then select setting 7 (4) - Whisk: setting 7 (4), mix in at setting 1 (1) - Kneading hook: first stir in at setting 1 (1), knead at setting 3 (2) Adding more ingredients • Switch off the appliance with the rotary switch. • Add more ingredients through the feed tube in the cover. or • Remove lid. • Press the Release button and move the swivel arm to position 2. • Add ingredients. After using the appliance • Switch off the appliance with the rotary switch. • Pull out the mains plug. • Remove lid. • Press the Release button and move the swivel arm to position 2. • Take the tool out of the drive. • Remove the bowl. • Clean all parts, see “Cleaning and servicing”. Continuous-feed shredder A Risk of injury Do not grip the sharp blades or edges of the cutting discs. Take hold of cutting discs by the edge only. Before attaching/removing the continuous-feed shredder, wait until the drive has come to a standstill and pull out the mains plug. Do not reach into the feed tube. Warning! The continuous-feed shredder must be completely assembled before use. Never assemble the continuous-feed shredder on the base unit. Operate the continuous-feed shredder in the indicated operating position only. 16 Robert Bosch Hausgeräte GmbH en Predetermined breaking point Fig. S The built-in predetermined breaking point protects the drive of the appliance. If an overload occurs, the drive shaft of the continuous-feed shredder breaks. However, the drive shaft can easily be replaced. A new drive shaft with driver is available from customer service. Reversible slicing disc - thick/thin for slicing fruit and vegetables. Process at setting 5 (3). Designation on the reversible slicing disc: “1 ” for the thick slicing side “3” for the thin slicing side Warning! The reversible slicing disc is not suitable for slicing hard cheese, bread, rolls or chocolate. Slice boiled, waxy potatoes only when they are cold. Reversible shredding disc -coarse/fine for shredding vegetables, fruit cheese, except for hard cheese (e.g. Parmesan). Processing at setting 3 (2) or 4 (3). Designation on the reversible shredding disc: “2” for the coarse shredding side “4” for the fine shredding side Warning! The reversible shredding disc is not suitable for shredding nuts. Shred soft cheese with the coarse side only at setting 7 (4). I Grating disc - medium-fine for grating raw potatoes, hard cheese (e.g. Parmesan), cooled chocolate and nuts. Process at setting 7 (4). Warning! The grating disc is not suitable for grating soft cheese and cheese slices. Working with the continuous-feed shredder Fig. 0 • Press the Release button and move the swivel arm to position 2. • Insert the bowl: - Tilt the bowl forwards and then set it down. - Turn anti-clockwise until it locks into place. • Press the Release button and move the swivel arm to position 3. • Remove drive cover from the drive of the continuous-feed shredder. • Hold drive shaft with the predetermined breaking point face down with one hand underneath. • Attach required slicing or shredding disc. In the case of reversible discs, ensure that the required side is face up. • Grip drive shaft at the upper end and insert into the housing. • Attach the cover (note mark) and turn all the way in a clockwise direction. • Place continuous-feed shredder on the drive and turn all the way in a clockwise direction. • Turn rotary switch to recommended setting. • Put food to be processed in the feed tube and push down with the pusher. Warning! Prevent the cut ingredients from building up in the outlet opening. Tip: To ensure evenly cut ingredients, process slender ingredients in bunches. Note: If the food to be processed sticks in the continuous-feed shredder, switch food processor off, pull out mains plug, wait until the drive comes to a standstill, remove cover from the continuous-feed shredder and empty feed tube. After using the appliance • Switch off the appliance with the rotary switch. • Rotate the continuous-feed shredder in an anti-cl...

Scarica la tua

Per scaricare, digitare 2 cifre :