valutazioni - 7, GPA: 4
(
)
)
|
Facilità d'uso
D • Press the release button and move the swivel arm to position 4. • Remove the blender drive cover. • Attach blender jug (mark on the handle on mark on the base unit) and turn all the way in an anti-clockwise direction. • Add ingredients. Maximum capacity - liquid = 1.25 litres; maximum capacity frothing or hot liquids max. 0.5 litres; optimal processing capacity - solids = 50-100 g; • Attach the cover and turn anti-clockwise all the way into the blender handle. The lug must be engaged. • Set the rotary switch to the desired setting. Adding more ingredients • Switch off the appliance with the rotary switch. • Remove the cover and add ingredients or • remove the funnel and gradually add solid ingredients through the feed tube or • pour liquid through the funnel. After using the appliance • Switch off the appliance with the rotary switch. • Rotate the blender in a clockwise direction and remove. Tip: It is recommended to clean the blender immediately after use. Cleaning and servicing ! Attention! Do NOT use abrasive cleaning agents. Surfaces may be damaged. Cleaning the base unit A Risk of electric shock! Never immerse the base unit in water or place under running water. Do not use a steam cleaner. • Pull out the mains plug. • Wipe the base unit and drive cover with a damp cloth. If required, use a little detergent. • Then dry the base unit. Cleaning the bowl and tools The bowl and tools are dishwasher-safe. Do not wedge plastic parts in the dishwasher, as they could be permanently deformed during the washing process! Cleaning the continuous-feed shredder All parts of the continuous-feed shredder are dishwasher-proof. Tip: To remove the red film after processing e.g. carrots, pour a little cooking oil on a cloth and rub the film off the continuous-feed shredder (not the cutting discs). Then rinse the continuous-feed shredder. Cleaning the blender A Risk of injury from sharp blades! Do not touch blender blades with bare hands. The blender jug, lid and funnel are dishwasher-safe. Tip: After processing liquids, it is often sufficient to clean the blender without removing it from the appliance. Pour a little water and washing-up liquid into the attached blender. Switch on the blender for several seconds (setting M). Pour out the water and rinse out the blender with clear water. Important information If required, clean accessories bag. Follow care instructions in the bag. Storage A Risk of injury! When the appliance is not in use, pull out the mains plug. Fig. H • Store tools and cutting discs in the accessories bag. • Keep accessories bag in the bowl. • To store in the original packaging, see Fig. D. 18 Robert Bosch Hausgeräte GmbH en Troubleshooting A Risk of injury! Before eliminating a fault, pull out the mains plug. Important information for MUM54../MUM56.. The On/Off display flashes if the appliance has been operated incorrectly or the fuse has tripped or the appliance is defective. The swivel arm must be engaged in every operating position. Initially try to eliminate the problem which has occurred with the help of the following information. Fault Appliance does not start. Remedial action • Check the power supply. • Check the mains plug. • Check swivel arm. Correct position? Engaged? • Screw on blender or bowl as far as possible. • Attach the blender cover and screw on as far as possible. • Attach drive cover to unused drives. • The safety lock is active. Switch appliance to 0/off and then back to the required setting. Fault Appliance switches off during use. The overload protection feature has been activated. Too much food was processed at one time. Remedial action • Switch off the appliance. • Reduce processing quantity. Do not exceed permitted maximum quantities (see “Application examples”). Fault While the drive was running, the release button was inadvertently pressed. The swivel arm moves up. The drive switches off, but does not stop in the tool change position. Remedial action • Set rotary switch to 0/off. • Move swivel arm to position 1. • Switch on appliance (setting 1). • Switch off appliance again. • Tool stops in tool change position. Fault Blender does not start working or stops during use, the drive is “humming”. Blade is blocked. Remedial action • Switch off the appliance and pull out the mains plug. • Detach the blender and remove the obstruction. • Re-attach the blender. • Switch on the appliance. m Important information If the fault cannot be eliminated, please contact customer service. Application examples Whipped cream 100-600g • Whip cream with the whisk for 1% to 4 minutes at setting 7 (4) depending on the quantity and properties of the cream. Egg white 1 to 8 egg whites • Beat egg white with the whisk for 4 to 6 minutes at setting 7 (4). Sponge mixture Basic recipe 2 eggs 2-3 tbs. hot water 100 g sugar 1 packet of vanilla sugar 70 g flour 70 g cornflour Baking powder if requi...
Questo manuale è adatto anche per i modelli :Robot da cucina - MUM 52.. (22.82 mb)
Robot da cucina - MUM 54.. (22.82 mb)
Mixer - MUM56320CH/01 (22.84 mb)
Mixer - MUM56320CH/02 (22.84 mb)