valutazioni - 1, GPA: 5 ( )

Produttore : Linear File Size : 781.02 kb File Nome : Lingua di insegnamento:

The Arming Mode area will show the Console’s current mode. Pressing the REFRESH button will update the displayed information. Local Connection in Progress Remote Connection in Progress 5.4 SENDING DATA SEND BUTTON PURPOSE: For transferring data from an Account Profile to a DVS-2400 Console. . CAUTION: Receiving the data from the Console will overwrite the data in the Account Profile. If you have made changes to the Account Profile, save the profile, then send the profile to the Console before receiving the data into the profile. This leaves previously learned sensor information unchanged. If this is a new Account Profile, its OK to receive the Console data into the new profi le. USER RESPONSE: SENDING . Click the SEND DATA TO CONSOLE button. The Communications Status area will indicate the progress and show if the data was sent to the Console successfully. SPECIAL NOTES: You can make changes to the Account Profile while the Console is connected. Be sure to send any changes to the Console before disconnecting. Minimize the Send/Receive window or slide it out of the way before editing the Account Profile. There is a time limit to the connection. The Console will automatically disconnect after three minutes of inactivity. 5.5 RECEIVING DATA RECEIVE BUTTON PURPOSE: For transferring data from a DVS-2400 Console to an Account Profile. . CAUTION: Receiving the data from the Console will overwrite the data in the Account Profile. USER RESPONSE: RECEIVING . Click the RECEIVE DATA FROM CONSOLE button. The Communications Status area will indicate the progress and show if the data was received from the Console successfully. 5.6 CHANGING THE CONSOLE’S MODE MODE SELECTION BUTTONS PURPOSE: To remotely view and change the operating mode of the Console. USER RESPONSE: ARMING MODE . View the current operating mode of the Console in the ARMING MODE display area. . To change the current operating mode of the Console, select the desired mode button (OFF, CHIME, HOME, or AWAY) in the ARMING MODE display area. . NOTE: Test Mode and Learn Mode can only be selected directly from the Console’s keypad. DISCONNECTING FROM THE CONSOLE DISCONNECT BUTTON PURPOSE: To end the programming session and disconnect the modem from the Console. USER RESPONSE: DISCONNECTING . When finished communicating with the Console, click on the DISCONNECT button. The Communications Status area will show Not Connected when the Console has been disconnected. 5.8 CLOSING RA-2400 EXIT COMMAND PURPOSE: To save the active Account Profile(s) and quit the RA-2400 program. USER RESPONSE: . From the FILE menu, choose EXIT. . To save while exiting, in the SAVE CHANGES? window click YES. If the active Account Profile is the default template, select a location and new name for the file and click SAVE. If the active Account Profi le already has a custom fi le name, it will be saved with the same name. . NOTE: If more than one Account Prof...

Scarica la tua

Per scaricare, digitare 2 cifre :