valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
4.13.2 4 BY 2 POINT-TO-POINT TROUBLE CODES PURPOSE: To view and edit the 24 sensor/zone trouble report codes. . NOTE: 4 by 2 Point-to-Point Reporting must be selected (see Section 4.13) for these codes to report. USER RESPONSE: ZONE CODES . Enter a new two-digit trouble code for any sensor/zone that needs to be changed. . NOTE: Entering a “0” for a trouble code will prevent that zone from reporting. 4.13.3 4 BY 2 POINT-TO-POINT ARMING (CLOSING) CODES PURPOSE: To view and edit the force arming report code. This report is sent when force arm is enabled (Section 4.12) and the system is armed with any open sensors that have been bypassed. . NOTE: With either reporting method, the force arming code is the same. USER RESPONSE: ACCESS CODES (CLOSE) . FORCE-ARM: Enter a new two-digit force arming code if it needs to be changed. . NOTE: Entering a “0” for a force arming code will prevent it from reporting. 4.13.4 4 BY 2 POINT-TO-POINT DISARMING (OPENING) CODES PURPOSE: To view and edit the duress report code. This report is sent when the system is armed or disarmed using the duress access code. . NOTE: With either reporting method, the duress code is the same. USER RESPONSE: ACCESS CODES (OPEN) . DURESS: Enter a new two-digit duress code if it needs to be changed. . NOTE: Entering a “0” for a duress code will prevent it from reporting. 4.13.5 4 BY 2 CONSOLE ALARM CODES PURPOSE: To view and edit the five Console report codes. These codes are sent for Console events such as the Console emergency button, fire button, Console low battery and battery restore.The cancel report occurs when the Console is disarmed during an alarm. . NOTE:These report codes are sent for both 4 by 2 General and 4 by 2 Point-to-Point Reporting. USER RESPONSE: CONSOLE ALARM CODES . Enter a new two-digit report code for any Console event that needs to be changed. . NOTE: Entering a “0” for a report code will prevent that event from reporting. 4.13.6 4 BY 2 GENERAL ALARM CODES PURPOSE: To view and edit the four general alarm codes and the general trouble code. . NOTE: 4 by 2 General Reporting must be selected (see Section 4.13) for these codes to report. USER RESPONSE: 4 BY 2 GENERAL ALARM CODES . Enter a new one or two-digit report code for any general alarm code that needs to be changed. . NOTE: Entering a “0” for an alarm code will prevent that event from reporting. 4.14 ADEMCO CONTACT-ID REPORT CODES The Ademco Contact-ID reporting codes are pre-defined and cannot be changed. These reporting codes are provided as reference. The Ademco Contact-ID extended report codes indicate the sensor number that triggered the event. Console events report with a “000” extended code. . NOTE: Ademco Contact-ID Reporting must be selected for these codes to report (see Section 4.10). -ID REPORT CODES SEDOCTROPERDI-SEDOCTROPERDI-SEDOCTROPER---DISEDOCTROPERDISEDOCTROPERDI ADEMCO CONTACT TCATNOCOCMEDATCATNOCOCMEDATCATNOCOCMAAAEDTCATNOCOCMEDTCA...
Questo manuale è adatto anche per i modelli :Robot da cucina - REMOTE ACCESS SOFTWARE DVS-1200 (781.02 kb)
Robot da cucina - REMOTE ACCESS SOFTWARE DVS-1200 (781.02 kb)
Robot da cucina - REMOTE ACCESS SOFTWARE DVS-2400 (781.02 kb)
Robot da cucina - REMOTE ACCESS SOFTWARE DVS-2408 (781.02 kb)