valutazioni - 4, GPA: 4.5
(
)
)
|
Facilità d'uso
Repeatedly press RADIO ON/OFF BAND until the desired band appears (AM, FM,or TV). 2. Press TUNING UP or DOWN to reach the desired station. 3. Hold down one of the preset number buttons (1–5) for about 2 seconds. The selected preset number and PRESET appear and the cassette player stores the station. Note: To store stations in preset numbers 6–10, press +5, then hold down the appropriate number button for about 2 seconds. For example, to UsingtheRadio 21 14-1250.DS.fm Page 22 Tuesday, May 16, 2000 2:32 PM store a station in preset number 6, press +5, then hold down 1. Repeat Steps 1–3 to store more stations. To replace a station you stored, simply store a new station in that preset number. Selecting Stored Stations 1. Repeatedly press RADIO ON/OFF BAND to select the desired band. 2. Press a preset number button (1–5) to select a stored station. To select preset numbers 6–10, press +5 then the appropriate preset number button. Notes: • Do not hold down the preset number buttons for more than a second when you select a preset station. Otherwise, the station currently tuned in will be preset to that button. •Since +5 also activates the sleep timer, do not hold down +5 for more than 2 seconds when you select a preset station. Otherwise, the cassette player will begin sleep timer setup. 22 UsingtheRadio 14-1250.DS.fm Page 23 Tuesday, May 16, 2000 2:32 PM USING HOLD HOLD locks the cassette player’s radio function buttons and E-BASS (GAME) so you cannot accidentally change them. To lock the buttons, rotate HOLD down. HOLD flashes for several seconds, then appears steadily. To unlock the buttons, rotate HOLD up to the horizontal position. UsingtheRadio 23 14-1250.DS.fm Page 24 Tuesday, May 16, 2000 2:32 PM . UsingtheTape Player Reverse Mode FWD/REV direction Switch switch DC 3V Jack OPEN Switch LOADING A CASSETTE TAPE The cassette player uses normal bias, high-bias, and metal tapes. 24 UsingtheTapePlayer 14-1250.DS.fm Page 25 Tuesday, May 16, 2000 2:32 PM Note: Thecassetteplayercomes witha block of foam to protect the cassette player’s playback head during shipment. Remove thefoam beforeloadingatape. 1. Take up any slack in the tape by turning the cassette’s hub with a pencil. Do not touch the exposed tape. 2. Slide OPEN in the direction of the arrow and open the compartment door by pulling it toward you. 3. Insert a cassette into the door’s tape guides with the cassette’s open edge facing up and the desired side visible through the window. 4. Close the cassette compartment door. PLAYING A TAPE 1. If the radio is on, turn it off by repeatedly pressing RADIO ON/OFF BAND until the display is turned off. 2. Slide NOR HI/MTL to NOR for Type I (normal bias) cassette tapes or to HI/ MTL for Type II (high bias) and Type IV (metal) tapes. UsingtheTapePlayer 25 14-1250.DS.fm Page 26 Tuesday, May 16, 2000 2:32 PM 3. Slide FWD/REV to FWD to play the side facing out, or to REV to play the reverse side. 4. Press....... ..... ..... PLAY. The battery indicator and TAPE appear and the tape begins to play. 5. Adjust VOLUME to a comfortable listening level. 6. To emphasize the bass sounds, press E-BASS until a bar appears above the E-BASS–ON.Press E-BASS until the bar appears above E-BASS–OFF to turn it off. 7. To stop the tape, press STOP. USING REVERSE MODE Set the reverse mode switch to choose the desired automatic reverse option: One-Time Playback — The cassette player plays one side of the tape, automatically reverses the tape’s playback direction, plays the reverse side of the tape, then automatically stops. Note: If you set FWD/REV to REV, the cassette player plays only the reverse side and stops at the end of that side. The cas 26 UsingtheTapePlayer 14-1250.DS.fm Page 27 Tuesday, May 16, 2000 2:32 PM sette player also stops when FWD/REV is changed from REV to FWD. Continuous Playback — The cassette player alternately plays each side of the tape until you press STOP. USING FAST-FORWARD AND REWIND While the tape is stopped, press or to rewindtofast-forward. FWD/REV set to To rewind, press To fast- forward, press FWD REV To stop the tape before it reaches the end, press STOP. Notes: • and are not released at the end of the tape. Press STOP to release them. • To prevent tape damage, press STOP before changing to radio mode. UsingtheTapePlayer 27 14-1250.DS.fm Page 28 Tuesday, May 16, 2000 2:32 PM TAPE TIPS We do not recommend long-play cassette tapes such as C-120s because they are thin and can easily tangle. Restoring Tape Tension and Sound Quality After you play a cassette tape several times, the tape might become tightly wound on the reels. This can cause playback sound quality to deteriorate. To restore the sound quality, fast-forward the tape from the beginning to the end of one side, then completely rewind it. Loosen the tape reels by gently tapping each side of the cassette’s outer shell on a flat surface. Caution: Be careful not to damage the cassette when tapping it. Do not touch the exposed tape or allow any sharp objec...
Questo manuale è adatto anche per i modelli :Ricevitori - SCP-107 (907.13 kb)