|
Facilità d'uso
HD. MOUNTING SCREWS (2) #8 X 5/16” MACHINE SCREWS & (2) #8 WASHERS FOR NON-DUCT DIVERTER CLEANING & MAINTENANCE For performance, appearance, and health reasons, clean filter, fan and grease-laden surfaces. Use only a clean cloth and mild detergent solution on stainless and painted surfaces. Clean all-metal filters in the dishwasher using a non-phosphate detergent. Discoloration of the filter may occur if using phosphate detergents, or as a result of local water conditions - but this will not affect filter performance. This discoloration is not covered by the warranty. Clean the non-duct recirculating filter surfaces frequently with a damp cloth and a mild detergent. DO NOT immerse filters in water or put in dishwasher. The special “Clean Sense” feature indicates when the filter is to be replaced. The blue and yellow strips will blend to green when it is time to change the filter. The “Clean Sense” feature works best when facing toward the cooking surface. Change the non-duct recirculating filters every 6 months. For replacement non-duct recirculating filters - purchase S99010353 or Model BPPF30 for 30 wide hoods” S99010354 or Model BPPF36 for 36” wide hoods, or S99010360 or Model BPPF42 for 42” wide hoods. The motor is permanently lubricated and never needs oiling. If the motor bearings make excessive or unusual noise, replace the motor with the exact service motor. The impeller should also be replaced. Use 120 V, 50 W, shielded halogen bulbs - MR16 with GU10 base. OPERATION Always turn the hood ON before cooking in order to establish an air flow in the kitchen. After turning off the range, let the hood run for a few minutes to clear the air. Operate the hood as follows: CO 8 Pressing the same light button again will turn lights OFF A light above each button indicates light setting. Turns light on to LOW setting. Turns light on to MEDIUM setting. Turns light on to HIGH setting. » CO 8 tv FAN (3 pushbutton switches) Turns fan on to LOW speed. Turns fan on to MEDIUM speed. Turns fan on to HIGH speed. Pressing the same fan button again will turn fan OFF. A light above each button indicates fan speed. NOTE This hood utilizes an offset blower design to achieve greater performance and lower sound levels. As a result, you may notice that cooking impurities are more attracted to one side or appear to be pulled-in faster than they appear on the opposite side. This is completely normal. The hood has been designed and tested to provide good capture of cooking impurities and odors under all normal cooking conditions regardless of the cooking location on the cooktop. Please note that cooking on the rear burners will always result in the best capture of cooking impurities, regardless of the hood design. HEAT SENTRY SYSTEM This range hood is equipped with an advanced Heat Sentry system that monitors for excessive temperature and automatically adjusts the fan to the appropriate setting. 1) If the fan is on, the Heat Sentry system wil...
Questo manuale è adatto anche per i modelli :Forni a microonde - EVOLUTION QP236BL (2.14 mb)
Forni a microonde - EVOLUTION QP236SS (2.14 mb)
Forni a microonde - EVOLUTION QP236WW (2.14 mb)
Forni a microonde - EVOLUTION QP242BC (2.14 mb)