valutazioni - 1, GPA: 5 ( )

Produttore : Craftsman File Size : 1.54 mb File Nome : Lingua di insegnamento:

. For the location of the nearest Authorized Warranty Service Center call 1-888-559-8550, Ext. 2, 24 hours a day, 7 days a week or visit our web site @ devap.com. . All pressure washers carry a manufacturer's one year warranty from date of purchase for consumer use and a 90 day warranty for commercial use. . Retain sales receipt as proof of purchase for warranty service. 5 — ENG D22885 BOX CONTENTS Handle Engine Manual Engine Frame and Wheel High Pressure Hose Assembly Bagged Handle Chemical Hose Engine Oil Bagged Parts Nozzle Cleaning Kit Knobs w/hardware English/ Spanish/ French Operator’s Manual Quick Connect Turret Wand PCH2425, PCH2627, PCH3030, PCH3540HR Spray Gun Multi-Reg Wand PCV2021 Accessories Panel with hardware PCV2021 Hose Reel with parts bag and instruction manual PCH3540HR 6 — ENG D22885 ASSEMBLY 1. Connect handle to frame. 2. Connect wand to gun. Tighten securely. PCV2021 PCH2425, PCH2627, PCH2425, PCH2627, PCV2021 PCH3030 PCH3030, PCH3540HR 3. Attach high pressure hose to gun. NOTE: The To connect handle and hose reel to PCH3540HR: point of attachment for the high pressure hose will a. Connect handle (a) and tube bracket (b) to differ depending on the model purchased. Tighten frame using the hardware (c) supplied. securely. b. Assemble hose reel as described in the hose reel instruction manual. c. Bolt the hose reel (d) to reel bracket (e) as shown. Tighten securely. IMPORTANT: Read the hose reel instruction manual supplied for safety and operating instructions. d e a b c PCH2425, PCH2627, PCV2021 PCH3030, PCH3540HR 4. Add engine oil (supplied) to engine. Refer to engine manual supplied by engine manufacturer for procedure. Do not overfill. Use of a funnel is recommended. NOTE: There will be a slight amount of oil in the engine from factory testing. NOTE: The pump was filled with oil at the factory. There is no need to add oil at this time, see the Maintenance section of this manual to perform maintenance on this pump. 7 — ENG D22885 TO ASSEMBLE ACCESSORIES PANEL REMOVE SHIPPING PLUG (PCV2021) (PCH2627, PCH3030) REMOVE SHIPPING PLUG (PCV2021) (PCH2627, PCH3030) 3.Place grooves in accessories panel assembly onto screws and slide panel assembly into place. 4.Place screws (removed earlier) into the top holes and secure accessories panel assembly to handles. Do not overtighten. The handle MUST be THE assembled to the frame PUMP IS in order to safely assemble the acces- SHIPPED FROM THE FACTOsories panel. RY WITH OIL IN IT AND A RED SHIPPING PLUG TO PREVENT 1. Remove top screws on handle assembly. ANY OIL FROM LEAKING OUT OF THE 2. Loosen bottom screws on handle assembly. PUMP DURING SHIPMENT. ATTACHED TO THE SHIPPING PLUG IS A PLASTIC BAG (SEE THE FOLLOWING PHOTO) WHICH CONTAINS THE DIPSTICK/OIL PLUG THE SHIPPING PLUG MUST BE REMOVED AND THE DIPSTICK/OIL PLUG INSTALLED BEFORE THE PRESSURE WASHER IS OPERATED. Loosen 1. Using a 17 mm wrench, remove shipping plug from pump by turning it counterclockwise. Discard plug. Accessories Panel...

Scarica la tua

Per scaricare, digitare 2 cifre :