valutazioni - 3, GPA: 3.7 ( )

Produttore : Craftsman File Size : 1.54 mb File Nome : Lingua di insegnamento:

See How To Use Wand instructions in this section. DO NOT STOP SPRAY ING WATER FOR MORE THAN TWO MINUTES AT A TIME. PUMP OPERATES IN BYPASS MODE WHEN SPRAY GUN TRIGGER IS NOT PRESSED. IF PUMP IS LEFT IN BYPASS MODE FOR MORE THAN TWO MINUTES INTERNAL COMPONENTS OF THE PUMP CAN BE DAMAGED. WHEN USING THE HIGH PRESSURE SETTING, DO NOT ALLOW THE HIGH PRESSURE SPRAY TO COME IN CONTACT WITH UNPROTECTED SKIN, EYES, OR WITH ANY PETS OR ANIMALS. SERIOUS INJURY CAN OCCUR. 12 — ENG D22885 3. Turn water source off. SHUTTING DOWN 4. Pull trigger on spray gun to relieve any water 1. If you have siphoned chemicals, siphon a bucket pressure in hose or spray gun. of clean water through the chemical hose. NOTE: 5. See Storage section in this manual for proper stor- Failure to do so will cause damage to the pump. age procedures. 2. Turn engine off. See Engine Owner’s Manual. NOTE: NEVER turn the water off with the engine running. Never turn water supply off while pressure washer engine is running or damage to pump will result. MAINTENANCE WHEN PERFORMING MAINTENANCE, YOU MAY BE EXPOSED TO HOT SURFACES, WATER PRESSURE, MOVING PARTS, OR FIRE RESULTING IN DEATH. BEFORE PERFORMING ANY MAINTENANCE OR REPAIR, DISCONNECT SPARK PLUG WIRE, LET ENGINE COOL AND RELEASE ALL WATER PRESSURE. THE ENGINE CONTAINS FLAMMABLE FUEL. DO NOT SMOKE OR WORK NEAR OPEN FLAMES WHILE PERFORMING MAINTENANCE. To ensure efficient operation and longer life of your pressure washer, a routine maintenance schedule should be prepared and followed. If the pressure washer is used in unusual conditions, such as high-temperatures or dusty conditions, more frequent maintenance checks will be required. ENGINE PUMP 1. Consult the Engine Owners Manual for the manu-1. Pump oil (checking and changing). Refer to the folfacturer's recommendations for any and all main-lowing illustrations to identify which pump is on tenance. your pressure washer. Refer to the chart for oil type, oil capacity, and maintenance schedule (if applicable). DAPC Axial Cam (PCH2425) DAPC Radial (PCV2021) Annovi Reverberi (PCH3030, PCH2627) Cat (PCH3540HR) 13 — ENG D22885 PUMP MAINTENANCE CHART PUMP TYPE OIL TYPE OIL CAPACITY CHANGE OIL First 10 hours after every 50 hours Annovi Reverberi (XMV) 30W non detergent 13.5 oz. x x Annovi Reverberi (XRV) 30W non detergent 18.54 oz. x x Annovi Reverberi (XTV) 30W non detergent 9.92 oz. x x Annovi Reverberi (RKV) 30W non detergent 18.54 oz. x x DAPC (axial cam) * R&O 150 8 oz. x x DAPC (radial) ** none n/a n/a n/a Cat 30W non detergent red dot on sight glass x x * If unable to find use 30 W non detergent ** This pump requires no oil, it is an oilfree pump NOZZLE CLEANING If the nozzle becomes clogged with foreign materials, such as dirt, excessive pressure may develop. If the nozzle becomes partially clogged or restricted, the pump pressure will pulsate. Clean the nozzle immediately using the nozzle kit supplied and the following instructions: Multi-Reg (PCV2021): 1. Shut off the pressure washer a...

Scarica la tua

Per scaricare, digitare 2 cifre :