valutazioni - 4, GPA: 3
(
)
)
|
Facilità d'uso
/ < 10 W stand-by, < 3 W sleep mode (See page 14) Controls Front Power ON / OFF, E, 3, E, EH keys On screen display Contrast, Brightness, Size & Pos. (Zoom, H. Position, H. Size, V. Position, V. Size), Geometry (V. Pincushion, Side Pin. Bal., Trapezoid, Parallelogram, Top Comer, Bottom Corner, S-Curve 1, S-Curve 2), Rotation (Tilt), Color Temp. (9300 K + 8 MPCD, 7500 K, 6500 K, 5000 K, 9300 K + 27 MPCD and User), Recall, Videc Level (0.7 V /1 V), V. Moire, H.Convergence, V.Convergence, Purity (1, 2, 3, 4) Linearity-C, Linearity-E, Language, OSD Position, Degauss, Signal (Port A, Port B, Display frequency), Self-Test menu Tilt / swivel 12° up, 5° down, 90° each to right and left Dimensions (W x H x D) 18.4" x 18.1" x 17.5" (468.4 mm x 459 mm x 443.5 mm) Weight (monitor only) 24.5 kg (54.4 lbs) Approvals UL1950, CSA 22.2 No.950, TUV / GS, CE / CISPR 22-B (EN55022), NORDIC, FCC Class 8, DHHS, HC, IC-B, VCCI Class B, MPR II, TCO’99, Energy StaH®, ISO 9241-3 (Ergonomics) / -8 (Colors) Standard 1 detachable signal cable for VGA, SVGA 1 detachable AC power supply cord Tilt & Swivel base attached Operating Instructions, Warranty card Environmental conditions Operating Temperature 5 to 35 *C(41 to 95 *F) Humidity 5 to 90% (no condensation) Altitude 10,000 ft Storage Temperature -20 to +60 *C (-4 to 140 °F) Humidity 5 to 90% (no condensation) Altitude 40,000 ft Windows® 95 / 98 Plug & Play VESA® DDC™ 1 / 2 B meets Windows® 95 / 98 Plug & Play Requirements Note: • The on-screen image may flicker if the display is operated with the Vertical freq. under 60 Hz. * Depends on signal timing used, see page 15. ** Number of colors depends on the Video Board used, memory installed, and RAMDAC (Random Access Memory Digital to Analog Converter). Specifications and design are subject to change without notice. This product may be subject to export control regulations. Weight and dimensions shown are approximate. 6 Installation ♦ Connecting Procedures Turn off your computer. Connect the signal and power connectors as shown below. Turn the monitor on, then turn on the computer. A. IBM PS / 2 or PC / AT compatible models Rear view ^ CEE-22 connector © AC power cord 15 pin mini D-Sub cable (D Connect the supplied 15 pin mini D-Sub cable to the monitor’s Port A. Then connect the other end of the supplied 15 pin mini D-Sub cable to the computer’s corresponding 15 pin mini D-Sub video connector. (D First connect the supplied AC power cord to the CEE-22 connector on the rear of the monitor. Then connect the other end of the AC power cord to a grounded power outlet. B. Apple computer © Connect the supplied 15 pin mini D-Sub cable to the monitor’s Port A. Then connect the other end of the supplied 15 pin mini D-Sub cable to a UN I MAC-82 D MAC adapter and the other end of the MAC adapter to the computer’s corresponding 15 pin mini D-Sub video connector. © First connect the supplied AC power cord to the CEE-22 connector on the rear of the monitor. Then connect the other end of the AC power cord to a grounded power outlet. Panasonic MAC adapter If you need an adapter and one is not provided by your dealer, call 1-800 PANASYS (1-800-726-2797). — Caution:- To prevent the cable from coming loose, the cable connectors must be securely fastened with screws. C. BNC connector signal computer Rear view Blue video signal Green video signal or sync on green Horizontal sync signal or composite sync signal Red video signal Vertical sync signal 63 WB © Connect the BNC signal cable (Not supplied) BNC connectors to the monitor’s Port B. Then connect the other end of the BNC cable, usually a 15 pin mini D-Sub connector, to the computer's corresponding 15 pin mini D-Sub video connector. ® First connect the supplied AC power cord to the CEE-22 connector on the rear of the monitor. Then connect the other end of the AC power cord to a grounded power outlet. ♦ Connection of AC Power Supply If the AC power supply voltage is in the range 100 V to 240 V, either 50 Hz or 60 Hz frequency can be used. There is no AC 100 V / 240 V selector switch as selection is automatic. — Precaution:- • In order to use the display unit safely, use a power cord that is properly grounded. • AC plug cords for the following countries must be used as follows: U.S.A..............UL Canada...........CSA For use in other countries, make sure that the AC cord meets the safety standards of each country. 7 Pin Assignment Follow the instructions below to connect the PF90 to a computer. A. Signal connector: 15 pin mini D-Sub (PS / 2 or PC / AT compatible model) Connect the signal cable to the 15 pin mini D-Sub connector on the display unit. B. Signal connector: 15 pin D-Sub (Apple computer) Convert a MAC 15 pin D-Sub connector to a 15 pin mini D-Sub connector using a Panasonic MAC adapter, and connect it to the 15 pin mini D-Sub connector on the display unit. < REAR PANEL > [hep) IGREEM [81UE] [H SYWCl IV-5YNCI frOHT-Bl C. Sign...