valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Sleep Timer Function When the sleep timer is used, the power is automatically turned off after the specified time has elapsed. 1. Press SLEEP to set the desired sleep time. The SLEEP indicator and sleep time appear on display window. 2. Press SLEEP once, the setting changes in the following order. SLEEP 180 >150 >120 >90 >80 >70 >60 >50 >40 >30 >20 >10 >OFF (No display) >SLEEP 180 ... Notes: • If you press SLEEP while the sleep time is displayed, the SLEEP time is reset. • To stop the function, press the SLEEP repeatedly until “SLEEP 10” appears, and then press MP3 Optimizer > > JAZZ > DRAMA > ROCK -Press EQ master to select USER EQ. 1. To enter the “USER EQ” setting mode, press SET while “USER EQ” is displayed. 2. In USER EQ mode, press B[] or x xx on the front panel repeatedly. Then you can select the sound effect you want among BASS, MIDDLE or TREBLE. 3. When a menu you select is displayed, press bb/BB on the front panel to set the sound level MIN, -4 ~ +4, MAX steps. -Then the sound level is displayed for a moment and the setting completed. 4. Repeat the steps from 2 to 3 to set other sound effect. 5. Press SET. XDSS (eXtreme Dynamic Sound System) Press XDSS plus to reinforce treble, bass and the surround effect. The “XDSS ON” or “NORMAL” indicator lights. SLEEP again. Timer Function With the TIMER function you can turn CD, USB play and radio reception on or off at a desired time. 1. Press CLOCK to check the current time. (If you don’t set clock, the timer function does- n’t work.) 2. Press TIMER to enter the timer setting mode. If you want to correct the previously memorized TIMER setting, press and hold TIMER for more than 2 seconds. -The previous memorized time and “ ” indicator appear on display window. 3. Each function (TUNER > CD > USB) flashes on display window in turn. Press SET when the desired function is flashing. 4. a. When you select the TUNER function, select the previously memorized preset number by pressing bb/BB on the front panel and press SET. b. When you select the CD or USB function, -‘ON TIME’ appears for about 0.5 seconds on display window and then disappears. 5. Set the hour to switch on pressing bb/BB on the front panel and press SET. 6. Set the minute to switch on pressing bb/BB on the front panel and press SET. -‘OFF TIME’ appears for about 0.5 seconds on display window and then disappears. 7. Refer to the steps 5 - 6 and set the hour/ minute to switch off. 8. Adjust the volume level by pressing bb/BB on the front panel and press SET. 9. Switch the system off. The selected function is automatically switched on or off at the time set. To cancel or check the timer Each time TIMER is pressed, you can select the timer set or cancel. You can also check the timer setting status. To activate or check the timer, press the TIMER that “” appears on display window. To cancel the TIMER, press TIMER, then “ ” disappears on display window. PORTABLE Function When you connect a portable music playing device to the PORT. IN jack on this device by using a 3.5mm mini stereo cable (not supplied), you can hear the sound being outputted from the portable device through the speaker. Portable Device PORT.IN Headphone or Line out 1. Connect the PORT.IN jack on this device to a headphone jack on another portable one by using a cable. 2. Press FUNCTION or AUX repeatedly to select PORTABLE function. 3. Start playing the connected portable device. 4. Adjust the volume by using VOLUME. Note: The “ 3.5mm mini stereo cable” is sold separately. USB Function You can enjoy MP3/WMA media file saved on MP3 player or USB memory device by connecting the device to the USB port of this unit. USB Memory, MP3 Player (or Memory Card Reader, etc.) Compatible Devices 1. Devices which require additional program installation when you connect it to a computer, are not supported. 2. MP3 Player : Flash type MP3 player. • The MP3 player requiring installation of a driver is not supported. 3. USB Flash Drive : Devices that support USB2.0 or USB1.1. 8 9 Operation 9 Operation Basic Playback 1. Connect the USB device to the USB connector of your unit. 2. Press USB to select USB function. “CHECKING” appears on display window, and then the total number of files is displayed. 3. Press B BB/[] (PLAY/PAUSE). In addition, you can also play using the NUMERIC buttons. To Remove the USB from the unit 1. Press FUNCTION repeatedly to select other modes. 2. Remove the USB from the unit. Note: Besides Basic Playback, if you want to operate other functions, see the CD Playback section. Moving to other cards In case that more than two memory cards are connected to the USB port, press D.SKIP on the remote control to select a card you want to use. Notes: • Do not extract the USB device in operating. • A back up demands to prevent a data damage. • If you use a USB extension cable or USB hub, the USB device might not be recognized. • A device using NTFS file system is not supported (Only the FAT (16/32) file system is supported.). • The USB function ...