valutazioni - 3, GPA: 4
(
)
)
|
Foto e specifiche Sony CMT-DH3 |
Facilità d'uso
Listening to FM or AM 1 Press FUNCTION +/.. repeatedly to select “TUNER FM” or “TUNER AM” (or press TUNER/ BAND . on the unit repeatedly to select “FM” or “AM”). 2 Press and hold TUNING +/.. until the frequency indication changes and then release. Scanning stops automatically when a station is tuned in and “TUNED” lights up in the display. When a FM stereo program is tuned in, “ST” lights up in the display. If “TUNED” does not appear and the scanning does not stop, press TUNING +/.. repeatedly to tune in the station you want. When you tune in a station that provides RDS services, the station name appears on the display. (European model only) 3 Adjust the volume. Press VOLUME +/... To stop automatic scanning Press ... To change the AM tuning interval The factory setting for AM tuning interval is 9 kHz (or 10 kHz, for some areas, this function is not available on the European and Russian models). Use buttons on the unit. 1 Press TUNER/BAND .on the unit repeatedly to select “AM.” 2 Press ./.. to turn off the system. 3 Press DISPLAY . to display the clock. 4 While the clock is displayed, hold down TUNER/BAND .and then press ./.. to turn on the system. “AM 9k Step” or “AM 10k Step” appears in the display. When you change the interval, all the AM preset stations are erased. 60GB Tips . To improve broadcast reception, adjust the supplied antennas, or connect an external antenna. .When an FM stereo program has static noise, press REPEAT/FM MODE . repeatedly until “MONO” lights up in the display. There will be no stereo effect, but the reception will improve. Listening to preset radio station 1 Tune in the desired station (see “Listening to FM or AM” (page 60)). 2 Press DVD/USB/TUNER MENU .. “Memory?” flashes in the display. 3 Press ENTER .. A preset number flashes in the display. The stations are stored from preset number 1. Preset number 4 Press PRESET +/.. repeatedly to select the preset number you want. 5 Press ENTER .. “Complete!” appears in the display. The station is stored. 6 Repeat steps 1 to 6 to store other stations. You can preset up to 20 FM stations and 10 AM stations. The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs. 7 To listen to a preset station, press PRESET +/.. repeatedly to select the preset station you want. You can also press the numeric buttons ., then press ENTER . to select a preset station. To cancel presetting Press DVD/USB/TUNER MENU .. Tuner 1GB USB Device 2 Connect an optional USB device (Digital music player or USB Listening to music of an USB device You can connect an optional USB device (Digital music player or USB storage media) to the (USB) port . on the unit and listen to music stored in the USB device. Check the information on the websites about compatible USB devices that can be connected to this storage media) to the (USB) port . as shown below. USB device (Digital music player or USB system (page 103). The audio formats that can be played back by this system are as follows: ATRAC/MP3*/WMA*/AAC* * Files with copyright protection (Digital Rights Management) cannot be played by this system. Files downloaded from an online music store may not be played by this system. 1 Select the USB function. Press FUNCTION +/.. repeatedly to select “USB”. storage media) When USB cable connection is necessary, connect the USB cable supplied with the USB device to be connected. See the operation manual supplied with the USB device to be connected for details on the operation method. When the USB device is connected, the display changes as follows: “Reading” .“ATRAC AD1)” or “StorageDrive2)” 1) When connecting a digital music player. 2) When connecting USB storage media. The volume label is displayed next if recorded. Note It may take about 10 seconds before “Reading” appears depending on the type of USB device connected. 62GB 3 Start playback. Press .. (or USB .. on the unit). 4 Adjust the volume. Press VOLUME +/... Other operation To Press Stop playback ... Pause playback ... Press ..again or .. (or USB .. on the unit) to resume playback. Select an album +/... Select a track ./... Find a point in Hold down ./. a track . during playback, and release the button at the desired point. Select Repeat REPEAT/FM MODE Play . repeatedly until “REP” or “REP1” appears. Remove the Hold down .. until USB device “No Device” appears, then remove the USB device. View the DISPLAY . USB device repeatedly. information* * For example, you can view the USB device information such as the track number or album name during normal play, or the total playing time while the player is stopped. To change the play mode 1 Press DVD/USB/TUNER MENU . while the USB device is stopped. “Play Mode?” appears in the display. 2 Press ENTER .. 3 Press .or .. repeatedly to select the play mode. You can select the following play modes: . Continue (Normal Play): Plays back the audio tracks on the USB device in original order. . AlbmContinue: Plays back the audio tracks in the ...
Questo manuale è adatto anche per i modelli :Stereo - CMT-DH30 (4.14 mb)