valutazioni - , GPA: ( )

Istruzioni per l'uso Sony, Modello LBT-G5500

Produttore : Sony
File Size : 835.59 kb
File Nome :

Lingua di insegnamento:

Il documento viene caricato, si prega di attendere

Scarica la tua primo

Il documento viene caricato, si prega di attendere

Scarica la tua primo

da questo dispositivo ha anche altre istruzioni :

Stereo - LBT-G5500 (854.96 kb)

Stereo - LBT-G5500 (842.07 kb)

Stereo - LBT-G5500 (855.98 kb)

To change the preset number Start over from step 1. To change the AM tuning interval (Except for the European and the Middle Eastern models) The AM tuning interval is factory-preset to 9 kHz (10 kHz in some areas). To change the AM tuning interval to 10 kHz (or 9 kHz), press TUNER/BAND repeatedly until “AM” appears first, then turn off the system. While holding down ENTER/NEXT, turn the system back on. When you change the interval, the AM preset stations will be erased. To reset the interval, repeat the same procedure. Note The preset stations are canceled when you disconnect the power cord or if a power failure occurs for half a day. Connecting optional AV components To enhance your system, you can connect optional components. Refer to the instructions included with each component for details. Connecting audio components Connecting a turntable Be sure to match the color of the plugs and the connectors. To listen to the sound from the connected turntable, press FUNCTION repeatedly until “PHONO” appears. To the audio output of the turntable Note Using the turntable at high volume may cause distortion or howling. This is often caused by the bass sound from the speakers. The bass sound may be picked up by the needle of the turntable, and produce the distortion or howling. To avoid this, do the following: 1 Keep some distance between the speakers and the turntable. 2 Stop using the surround effect. 3 Install the speakers or the turntable on a firm and stable surface. 4 Press DBFB repeatedly until “DBFB ” disappears from the display (LBT-D390/G5500/ XB33/XB33K/XB50 only). Press SUPER WOOFER repeatedly until the indicator on this button goes off (except for LBTD390/ G5500/XB33/XB33K/XB50). Connecting an MD deck for digital recording (except for LBT-D390/ D790/G5500) You can record a CD to an MD digitally by connecting your MD deck using an optical cable. To the digital input of the MD deck Connecting an MD deck for analog recording (except for LBT-D390/ D790/G5500) Be sure to match the color of the plugs and the connectors. To listen to the sound of the connected MD deck, press FUNCTION repeatedly until “MD” appears. To the audio outputs To the audio inputs of of the MD deck the MD deck Note If you cannot select “MD” by pressing FUNCTION, press 1/uwhile pressing FUNCTION when the power is turned off. “VIDEO” will be switched to “MD.” To return to “VIDEO,” do the same procedure. Connecting surround speakers (LBT-D790/XB33/XB33K/XB50/XB60 only) You can connect optional surround speakers. To surround To surround speaker (R) speaker (L) Note You need to connect both left and right surround speakers. Otherwise, the sound will not be heard. Connecting a VCR Be sure to match the color of the plugs and the connectors. To listen to the sound from the connected VCR, press FUNCTION repeatedly until “VIDEO” appears. To the audio output of the VCR continued Connecting optional AV components (continued) Connecting outdoor antennas Connect an outdoor antenna to improve the reception. FM antenna Connect an optional FM outdoor antenna. You can also use the TV antenna instead. For European model IEC standard socket (not supplied) Screw clamp For other models Ground wire (not supplied) AM COAXIALFM 75 75-ohm coaxial cable (not supplied) Screw clamp Ground wire (not supplied) AM FM75 AM antenna Connect a 6 to 15 meter (20 to 50 feet) insulated wire to the AM antenna terminal. Leave the supplied AM loop antenna connected. For European model Screw clamp Insulated wire (not supplied) AM COAXIALFM 75 Ground wire (not supplied) For other models Screw clamp Insulated wire (not supplied) FM75 AM Ground wire (not supplied) Important If you connect an outdoor antenna, connect a ground wire to the yterminal with the screw clamp. To prevent a gas explosion, do not connect the ground wire to a gas pipe. Basic Operations 1 Press 6OPEN and place a CD on Playing a CD the disc tray. — Normal Play If the disc is not placed properly it will not be recognized. You can play up to five CDs in a row. With the label 1/u side up. (Power) VOLUME · When you play a CD single, place it on the inner circle of the tray. 2 Press DISC SKIP to place up to four more CDs on the tray. The disc tray rotates so you can insert other CDs. 3 Close the front cover. 4 Press one of the DIRECT PLAY buttons. Playback starts. If you press a (or CD (on the remote), playback starts from the CD in the playing position. 1/ALL DISCS Jog dial 1/ALLDISCS PLAYMODE REPERT EDIT A S LBT-D390/D790/G5500/XB33/XB33K/XB44/ ) 0 XB44K/XB50/XB60 Disc number in the playing position DISC SKIP P p AMS =/+ 0/) CD ( VOLUME +/– Elapsed time continued »» 6Pr0) 6 » Pp »» p60)p)0 pP 4 312 Track number DOLBY NR OFF AL Elapsed time LBT-XB66/XB66K/XB660 Disc number in the playing position Track number DISCALL DOLBY NR OFF S Basic Operations Playing a CD (continued) To Do this Stop playback Press p. Pause Press P. Press again to resume playback. Select a track During playback or pause, turn the jog dial clock...