valutazioni - 5, GPA: 3.8
(
)
)
|
Facilità d'uso
• Pressing CD (Pwhen the power is off automatically turns the power on and starts CD playback if there is a CD in the tray (One Touch Play). When the system is in the Power Saving Mode, the One Touch Play function does not work. • You can switch from another source to the CD player and start playing a CD just by pressing CD (Por the DISC 1~3 buttons (Automatic Source Selection). • If there is no CD in the player, “CD NO DISC” appears in the display. • When a disc tray holding a CD is selected (or playing), the DISC 1~3 button for that tray lights green. When a disc tray holding a CD is not selected, the DISC 1~3 button for that tray lights orange. When all disc trays are empty, the DISC 1~3 buttons all light green. Recording a CD — CD Synchro Recording The CD SYNC button lets you record from a CD to a tape easily. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is adjusted automatically. DISC SKIP/ EX-CHANGE CD (PDOLBY NR 2(Power) p 531 1 Press ¤and insert a recordable tape into deck B. With the side you want to record facing forward 2 Press ¤and place a CD. Then press again to close the disc tray. If the indicator for the tray you want to record is not lit green, press DISC SKIP/ EX-CHANGE repeatedly so that it lights green. With the label side up. When you play a single CD, place it on the inner circle of the tray. 3 Press CD SYNC. Deck B stands by for recording and the CD player stands by for playback. The indicator on TAPE B ((for front side) lights up. 4 Press DIRECTION repeatedly to select Ato record on one side. Select §(or RELAY) to record on both sides. 5 Press REC PAUSE/START. Recording starts. To stop recording Press p. Tips • If you want to record from the reverse side, press TAPE B 9to light its indicator after pressing CD SYNC. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR” appears after pressing CD SYNC. Note You cannot listen to other sources while recording. Basic Operations Listening to the radio –– Preset Tuning Preset radio stations in the tuner's memory first (see “Step 3: Presetting radio stations”). 21 (Power) STEREO/MONO VOLUME A . 1 Press TUNER/BAND repeatedly until the band you want appears in the display. The bands you can receive vary depending on the model you purchased. Be sure to check which bands you can receive. Every time you press the button, the band changes as follows: 2 band model: FM .AM 3 band model: FM nMW nSW n or FM nAM nUKV* n * “STEREO PLUS” is displayed when you select UKV. 2 Turn the jog dial (or press =or +on the remote) to tune in the desired preset station. Turn counter-Turn clockwise clockwise =+ (or press + (or press = on the remote) on the remote) for higher for lower preset preset numbers. numbers. Preset number* Frequency * When only one station is preset, “ONE PRESET” appears in the display. To Do this Turn off the radio Press . Adjust the volume Turn VOLUME (or press VOL +/– on the remote). TUNER/BAND =+ VOL +/– To listen to non-preset radio stations Use manual or automatic tuning in step 2. For manual tuning, press + or – repeatedly. For automatic tuning, press and hold + or –. Tips • Pressing TUNER/BAND when the power is off automatically turns the power on and tunes to the last received station (One Touch Play). When the system is in the Power Saving Mode, the One Touch Play function does not work. • You can switch from another source to the radio just by pressing TUNER/BAND (Automatic Source Selection). • When an FM program is noisy, press STEREO/MONO so that “MONO” appears in the display. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect. • To improve broadcast reception, reorient the supplied antennas. Recording from the radio You can record the radio program on a tape by calling up a preset station. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted. 1 (Power) DOLBY NR Basic Operations p 5 2 4,63 1 Press TUNER/BAND to select the band you want. 2 Turn the jog dial to tune in a preset station. Turn counter-=+ Turn clockwise clockwise for for higher lower preset preset numbers. numbers. Preset number Frequency continued Recording from the radio (continued) 3 Press ¤and insert a recordable tape into deck B. With the side you want to record facing forward 4 Press REC PAUSE/START. Deck B stands by for recording. 5 Press DIRECTION repeatedly to select Ato record on one side. Select §(or RELAY) to record on both sides. 6 Press REC PAUSE/START. Recording starts. To stop recording Press p. Tips • If you want to record from the reverse side, press TAPE B 9to light its indicator after pressing REC PAUSE/START in step 4. • When you record on both sides, be sure to start from the front side. If you start ...
Questo manuale è adatto anche per i modelli :Stereo - MHC-GRX50 (723.43 kb)
Stereo - MHC-GRX70 (723.43 kb)
Stereo - MHC-GRX70J (723.43 kb)
Stereo - MHC-GRX9900 (723.43 kb)