This state of the art turntable includes the latest features. Prior to use, we suggest that you carefully read all the instructions. - Fully manual direct drive turntable - Ultimate high torque (5 kg) direct drive turntable - Adjustable +/-10% or 20% pitch button w/ LED - Variable pitch slide control - Convenient retractable start/brake delay rotary controls - Solid aluminum platter with easy glide grooves and rubber damping - Silver metal plate w/ rubber painted base - Straight tone arm for sup

When you have selected the proper track press PGM and the CDM-3600 will be ready to set your next selection. Repeat the previous steps until you have completed your playlist, then press play to begin the set list. REPEAT: Press the repeat button once to engage ( 1) or repeat the selected track. Press REPEAT again to engage ALL setting wich will repeat all the tracks on the CD. Press REPEAT again to disengage the repeat function. SINGLE: Pressing the SINGLE button engages SINGLE mode, in this mod

Press the REVERSE button a second time to return to normal play. DIGITAL DISPLAY: 1. The DIGITAL DISPLAY (20) indicates SPEED (20A), PITCH SLIDE ACTIVATION (20B), PLAY (20C), PAUSE (20D), REVERSE (20E) and PITCH PERCENTAGE (20F). ARM-LIFT HEIGHT ADJUSTMENT: If the pre-adjusted distance that the CUE LEVER (19) raises the stylus off the record surface is inadequate, it can be adjusted by turning the ARMLIFT HEIGHT ADJUSTMENT SCREW (29) while simultaneously pushing down on the TONE ARM (6). Clockwi

See Figure B. LIGHTNING: For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall out let and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines o

OPERATIONS MANUAL BEDIENUNGSHANDBUCH MANUAL DEL OPERADOR MANUEL D’INSTRUCTIONS PT-2100 HIGH-TORQUE DIRECT-DRIVE PROFESSIONAL TURNTABLE PROFESSIONELLER PLATTENSPIELER MIT DREHMOMENTSTARKEM DIREKTANTRIEB GIRADISCOS PROFESIONAL DE ACCIONAMIENTO DIRECTO Y DE ALTO PAR MOTOR PLATINE VINYLE PROFESSIONNELLE HI-TORQUE AENTRAINEMENT DIRECT PILOTEE PAR QUARTZ GIRADISCHI PROFESSIONALE A COMANDO DIRETTO ED A ALTA COPPIA MOTRICE MULTI LANGUAGE INSTRUCTIONS: English.............................................

6. Refloat the TONE ARM to ensure horizontal zero (0) balance. If zero balance has not been maintained, repeat counterweight steps 3 - 5. 7. After adjusting the horizontal zero (0) balance, turn the balanced COUNTERWEIGHT (7) counter clockwise until the cartridge manufacturer’s recommend stylus pressure appears on the STYLUS PRESSURE RING (10) where it meets the center line of the TONE ARM (5) rear shaft. ADJUSTING THE ANTI-SKATING CONTROL: Set the ANTI-SKATING CONTROL (11) to the same value as

2. Release the ARM CLAMP (12) and lift the TONE ARM (9) off the ARM REST (13). 3. Counter clockwise advancement of the COUNTERWEIGHT (10) will cause the cartridge side of the TONE ARM (9) to be lowered; turning it clockwise will cause the opposite. Turn the COUNTERWEIGHT (10) clockwise or counter clockwise as needed until the TONE ARM (9) is balanced horizontally. You can easily tell this by watching for the point where the TONE ARM (9) “floats” freely. 4. Place TONE ARM (9) on ARM REST (13) and

XL-120MKU BELT-DRIVE MANUAL TURNTABLE MANUELLER PLATTENSPIELER MIT RIEMENANTRIEB GIRADISCOS MANUAL ACCIONADO POR CORREA TABLE TOURNANTE MANUELLE ENTRAÎNÉE PAR COURROIE MULTI-LANGUAGE CONTENTS: ENGLISH......................................................................................................................................................................................................................PAGE 5 DEUTSCH..................................................................

• When the product exhibits a distinct change in performance, this indicates a need for service. REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. SAFETY CHECK: Upon completion of any service or repairs to this product, ask the service technician to perform safety check

When done press stop. 10. Upon completion, press the TRACK button to enter the Vtr1-8 (Vtr1-6 on the D12) screen. 11. Using the cursor button highlight 1a then using the value wheel, select virtual track 1h. Do the same for track 2a (set to 2h). 12. Set the pan pots for tracks 1 & 2 left and right respectively, and set the faders to unity (0dB). 13. Repeat steps 1-12 for every song that you wish to put to CD. Now we’re ready to burn tracks 1 and 2 to CD. Set Scene Read to OFF at this point,