When done press stop. 10. Upon completion, press the TRACK button to enter the Vtr1-8 (Vtr1-6 on the D12) screen. 11. Using the cursor button highlight 1a then using the value wheel, select virtual track 1h. Do the same for track 2a (set to 2h). 12. Set the pan pots for tracks 1 & 2 left and right respectively, and set the faders to unity (0dB). 13. Repeat steps 1-12 for every song that you wish to put to CD. Now we’re ready to burn tracks 1 and 2 to CD. Set Scene Read to OFF at this point,

6. Refloat the TONE ARM to ensure horizontal zero (0) balance. If zero balance has not been maintained, repeat counterweight steps 3 - 5. 7. After adjusting the horizontal zero (0) balance, turn the balanced COUNTERWEIGHT (7) counter clockwise until the cartridge manufacturer’s recommend stylus pressure appears on the STYLUS PRESSURE RING (10) where it meets the center line of the TONE ARM (5) rear shaft. ADJUSTING THE ANTI-SKATING CONTROL: Set the ANTI-SKATING CONTROL (11) to the same value as

standstill to 33 1/3 RPM Braking System........................................Electronic Brake (Solenoid) Wow and Flutter...................................................................0.02% WRMS* * This rating refers to the turntable assembly and platter only and excludes effects of records, cartridges or tonearms. Rumble........................................................................56 dB Unweighted TONEARM SECTION: Type...............................................Universal S-Sha

2. Vor dem Entfernen immer die Abdeckhaube anheben. 3. Es sollte vermieden werden, die Abdeckhaube wahrend des Spielens zu offnen und zu schlieen. Dies konnte zu unerwunschten Vibrationen und Nadelspringen fuhren. ANSCHLUSSE: 1. Den Gleichstromleistungsstecker an einer geeigneten Buchse anschlieen. 2. Siehe Tabelle A fur vorschriftsma ige Anschlusse der Ausgangs-RCA- Stecker und des Erdungssteckers. Achten Sie darauf, da alle Stecker an den richtigen Buchsen fest angeschlossen sind (Phono-Eingan

Congratulations on purchasing a Gemini XL-500 II turntable. This state of CARTRIDGE INSTALLATION: (SEE FIG. 2) the art turntable includes the latest features. Prior to use, we suggest that Because all cartridges have their own designs, please refer to your you carefully read all the instructions. particular cartridge’s instructions to insure proper installation. Features • ±10% Pitch control • Braking for quick stops • Strobe illuminator • Soft-touch start/stop switch Precautions 1. Read all ope

der horizontale Nullpunktabgleich (0) gleich geblieben ist. Wurde er nicht beibehalten, wiederholen Sie die Schritte 3 - 5. 7. Nach dem horizontalen NULLPUNKTABGLEICH das abgeglichene BALANCEGEWICHT - COUNTERWEIGHT (8) gegen den Uhrzeigersinn drehen, bis der vom Tonabnehmerhersteller empfohlene Auflagedruck auf dem AUFLAGEDRUCKRING - STYLUS PRESSURE RING (11) erscheint, wo er mit der Mittellinie des TONARMS - TONE ARM (6) zusammentrifft. REGULIERUNG DER ANTISKATING-VORRICHTUNG: Die ANTISKATING-V

PITCH CONTROL (23) automatically disengages when the QUARTZ LOCK (25) is activated. 2. When the QUARTZ LOCK (25) is off, you can adjust the PITCH CONTROL (23). When you move the PITCH CONTROL (23) off center, the tempo can vary +/- 4%, +/- 8%, +/- 16% or +/- 35%, depending on which RANGE BUTTON (31) you select. These are lighted buttons and will light up when pressed. * Note: If your speed is 33 1/3 rpm and you adjust the tempo to +35% your speed will be exactly 45 rpm. Conversely, if your sp

XL-120MKU BELT-DRIVE MANUAL TURNTABLE MANUELLER PLATTENSPIELER MIT RIEMENANTRIEB GIRADISCOS MANUAL ACCIONADO POR CORREA TABLE TOURNANTE MANUELLE ENTRAÎNÉE PAR COURROIE MULTI-LANGUAGE CONTENTS: ENGLISH......................................................................................................................................................................................................................PAGE 5 DEUTSCH..................................................................

Press the REVERSE button a second time to return to normal play. DIGITAL DISPLAY: 1. The DIGITAL DISPLAY (20) indicates SPEED (20A), PITCH SLIDE ACTIVATION (20B), PLAY (20C), PAUSE (20D), REVERSE (20E) and PITCH PERCENTAGE (20F). ARM-LIFT HEIGHT ADJUSTMENT: If the pre-adjusted distance that the CUE LEVER (19) raises the stylus off the record surface is inadequate, it can be adjusted by turning the ARMLIFT HEIGHT ADJUSTMENT SCREW (29) while simultaneously pushing down on the TONE ARM (6). Clockwi

OPERATIONS MANUAL BEDIENUNGSHANDBUCH MANUAL DEL OPERADOR MANUEL D’INSTRUCTIONS PT-2100 HIGH-TORQUE DIRECT-DRIVE PROFESSIONAL TURNTABLE PROFESSIONELLER PLATTENSPIELER MIT DREHMOMENTSTARKEM DIREKTANTRIEB GIRADISCOS PROFESIONAL DE ACCIONAMIENTO DIRECTO Y DE ALTO PAR MOTOR PLATINE VINYLE PROFESSIONNELLE HI-TORQUE AENTRAINEMENT DIRECT PILOTEE PAR QUARTZ GIRADISCHI PROFESSIONALE A COMANDO DIRETTO ED A ALTA COPPIA MOTRICE MULTI LANGUAGE INSTRUCTIONS: English.............................................