valutazioni - 4, GPA: 3.8
(
)
)
|
Facilità d'uso
56). 25 Chapter 1 Quick Start Chapter 1 fig.1-20a.e fig.1-21.e * About PEDAL, TRIG 1, and TRIG 2, see p. 72–p. 73. U0101A* PAD SET Pitch +200cent Parameter Value Edit Target Patch Number (Pad Set, Ribbon, D Beam, etc.) "A", "B", or "C" appears appears if the Value is edited when "Pad Set" is selected 0 – 127 EZ Edit — Parameter List 0 – 127 0 – 127 Adjusts the volume of the entire patch. Give the pattern a name of up to 10 characters. PAD SET, RIBBON L, RIBBON R, D BEAM, PEDAL, TRIG 1, TRIG 2 REVERB MULTI-FX PATCH LEV PATCH NAME Inst Type Fx Rev Send MasterVolume Selects the instrument for Pad Set A, B, C (Ribbon, D Beam). Adjusts the volume. Adjusts the pitch of the sound. Adjusts the duration (decay time). Adjusts the pan (localization) of the output sound. Adjusts the reverb depth. Turns the multi-effects and LFO on/off. If you select PadData, this will be determined by the on/off setting in Edit mode (p. 36). Selects the type of the reverb. Adjusts the overall reverb depth. Adjusts the depth of reverb applied to the 0 – 127 sound processed by the multi-effects. Adjusts the output volume of the multi-effects. 0 – 127 Selects the type of the multi-effects. Adjusts the depth of the multi-effects. 0 – 127 Level Pitch Decay Pan ReverbSend MULTI-FX/LFO Depth Type Depth FxOut Volume OFF, ON, PadData 0 – 127 -31 – +31 L63 – R63, Random, Alternate -2400 – +2400 Refer to Effect Type List (p. 95) Refer to Effect Type List (p. 95) Refer to "Naming a Patch" (p. 55) * PadData can be selected for PAD SET. Refer to Pad Set Instrument List (p. 94) Pads can be selected by five sets. Random: The pan changes randomly each time the pad is struck..... Alternate: The pan alternates left and right each time the pad is struck. Chapter 1 Quick Start Playing Back a Preset Pattern 2 3, 4 5 1, 5 Press [SEQUENCER]. [SEQUENCER] will light, and you will enter Sequencer mode. Turn [PATCH/VALUE] to select the pattern. Press [PLAY/STOP]. The selected pattern will play back. For more on preset patterns, refer to “Preset Pattern List” (p. 91). To stop playback, press [PLAY/STOP] once again. The pattern will stop playing. Press [SEQUENCER] or [EXIT]. You will return to normal Play mode. P01 001-01 =100 4/4 Cha-Cha U: User P: Preset Pattern Name Pattern Number Tempo Time Signature Current Measure Current Beat 1 3 4 5 Changing the Tempo 27 Chapter 1 Quick Start Chapter The tempo can be changed either when the pattern is playing or stopped. 2 1, 3 1 Press [TEMPO]. [TEMPO] will light, current tempo is displayed in the screen. 2 Turn [PATCH/VALUE] to change the tempo. 3 Tempo =100 When you have finished making changes, press [TEMPO] once again. [TEMPO] will go dark, and you will return to the previous screen. Chapter 1 Quick Start System Settings Settings that are shared by all patches are called “system settings.” Settings such as the display contrast and the D Beam sensitivity are system settings. Adjusting the Display for Best Visibility (LCD Contrast) 2 1 3 1, 3 Press [SYSTEM]. [SYSTEM] will light, and the following screen will appear. UTILITY LCD Contrast 5 2 3 Turn [PATCH/VALUE] to adjust the contrast of the display screen. Increasing the value will darken the display. When you have finished adjusting, press [SYSTEM] or [EXIT]. You will return to normal Play mode. When you modify the system setting, the new setting is automatically saved as soon as you make the change. You do not have to operate for the storing. 29 Chapter 1 Quick Start Chapter 1The HPD-15 adjusts the sensitivity of the D Beam automatically when turns the power on. You can make your selection rapidly by using the Key Repeat Function (p. 31) or Skip Function (p. 32). The sensitivity of the D Beam will be less in a dark location. In such locations, it is a good idea to make the adjustment with your hand approximately 12 inches (30 cm) above the D Beam. For details on other system parameters, refer to “Chapter 5 Settings for the entire HPD-15” (p. 67). Adjusting the D Beam Sensitivity The sensitivity of the D Beam will change depending on the amount of light in the vicinity of the unit. If it does not function as you expect, adjust the sensitivity as appropriate for the brightness of your location. 3 2 4 1, 4 Press [SYSTEM]. [SYSTEM] will light. Press [PARAMETER ] to display the following screen. 1 2 CONTROLLER DBEAM Sens 100 3 Place your hand about 20 inches (50 cm) above the D Beam, and turn [PATCH/VALUE] to adjust the sensitivity. Move the meter at the upper right of the screen to the center line as shown in right screen. The D Beam will respond as far as the position where your hand was when you made the adjustment. CONTROLLER DBEAM Sens 100 CONTROLLER DBEAM Sens 64 4 When you have finished adjusting, press [SYSTEM] or [EXIT]. You will return to normal Play mode. Chapter 1 Quick Start If the Sound or Operation Is not as You Expect If, as you modify the settings, the sound or operation is no longer as you expect and you are unable to restore the correct settings, you can e...