Log:
valutazioni - 2, GPA: 3.5 ( )

Istruzioni per l'uso Yamaha, Modello 01V96i

Produttore : Yamaha
File Size : 4.63 mb
File Nome :
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


5 Level controls These controls adjust the ST IN channel levels. FADER MODE Section 1 2 FADER MODE AUX 1 AUX 2 AUX 3 AUX 4 AUX 5 AUX 8AUX 7AUX 6 HOME (METER) 1 [AUX 1]–[AUX 8] buttons These buttons enable you to select the Aux Send you wish to control. Pressing one of these buttons switches the Fader mode (see page 22), and displays the corresponding Aux page. (The selected button’s indicator lights up.) You can now adjust the send level of signals routed from Input Channels to the corresponding Aux buses by using the faders. 2 [HOME] button This button recalls Meter pages that display Input Channel levels or Output Channel (Bus Out, Aux Out, Stereo Out) levels (see page 23). DISPLAY ACCESS Section 1234 DISPLAY ACCESS DYNAMICS EQ EFFECT VIEW PATCH UTILITYMIDISCENEDIO/SETUP/ INSERT/ DELAY PAN/ ROUTING PAIR/ GROUP 90AB5687UTILITYMIDISCENE DIO/SETUP 1 [SCENE] button This button displays a Scene page, enabling you to store and recall Scenes. 2 [DIO/SETUP] button This button displays a DIO/Setup page, enabling you to set up the 01V96i, including digital input and output setup and remote control setup. 3 [MIDI] button This button displays a MIDI page, enabling you to make MIDI settings. 4 [UTILITY] button This button displays a Utility page, enabling you to use the internal oscillators and view information about installed optional cards. 5 [ /INSERT/DELAY] button This button displays a /INS/DLY page, enabling you to switch the signal phase, set the signal to be inserted, or set the delay parameters. 6 [PAN/ROUTING] button This button displays a Pan/Route page, enabling you to select a Bus to which the selected channel signal is routed, adjust the selected channel pan settings, adjust the level of signals routed from Buses 1–8 to the Stereo Bus, and adjust the stereo or surround pan settings. 7 [PAIR/GROUP] button This button displays a Pair/Group page, enabling you to create or cancel channel pairs and group multiple channel faders or [ON] buttons. 8 [PATCH] button This button displays a Patch page, enabling you to patch input signals and Bus Out signals to Input channels, or patch signals to the desired output connectors. 9 [DYNAMICS] button This button displays a Dynamics page, enabling you to control channel gates and compressors. 01V96i—Owner’s Manual STEREO OVER 0 -3 -6 -9 -12 -15 -18 -24 -30 -36 -48 STEREO OVER 0 -3 -6 -9 -12 -15 -18 -24 -30 -36 -48 Tip: The ST IN section is not affected by the layer settings. Tab Scroll arrow Control & Rear Panel 0 [EQ] button This button displays an EQ page, enabling you to set the equalizer and attenuator of the selected channel. A [EFFECT] button This button displays an Effect page, enabling you to edit the internal effects processors and use optional plug-in cards. B [VIEW] button This button displays a View page, enabling you to view and set mix parameters for a specific channel. LAYER Section MASTER REMOTE LAYER 1 23 1 [1–16]/[17–32] buttons These buttons select an Input Channel layer as the layer controlled in the Channel Strip section. When the [1–16] button is turned on, you can control Channels 1–16. When the [17–32] button is turned on, you can control Channels 17–32. (See page 21 for more information on the Input Channel layers.) 2 [MASTER] button This button selects the Master Layer as the layer controlled in the Channel Strip section. You can use this layer to control Bus Outs and AUX Sends. (See page 21 for more information on the Master layer.) 3 [REMOTE] button This button selects the Remote Layer as the layer controlled in the Channel Strip section. You can use this layer to control external MIDI devices or computer- based DAWs. Display Section 2 1 3 546 1 Display This is a 320 x 240 dot LCD display with a backlight. 2 Stereo meters These 12-segment level meters display the final output level of the Stereo Bus. 3 Contrast control This control adjusts the display contrast. 4 [F1]–[F4] buttons These buttons select a page from a multi-page screen. Selecting a tab at the bottom of the screen using one of these buttons displays the corresponding page. (See page 20 for more information on displaying a page.) 5 Left Tab Scroll [ ] button 6 Right Tab Scroll [ ] button If there are more pages available than the four whose tabs are currently displayed, use these buttons to display the additional tabs. These buttons are available only when the left or right Tab Scroll arrow appears. 01V96i—Owner’s Manual 14 Control Surface & Rear Panel 14 Control Surface & Rear Panel 6 HIGHHIGH-MIDLOW-MID LOW QFREQUENCY GAIN 2 3 7 4 85 1 [PAN] control This control adjusts the pan of the channel selected by the [SEL] button. 2 [HIGH] button 3 [HIGH-MID] button 4 [LOW-MID] button 5 [LOW] button These buttons select the EQ band (HIGH, HIGH-MID, LOW-MID, LOW) of the channel selected by the [SEL] button. The corresponding button indicator of the currently-selected band lights up. 6 [Q] control This control adjusts the currently-selected band Q. 7 [FREQUENCY] control This control adjusts ...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie