p.17). EINS (Insert) Enables/disables the insert-in. FSEL (Select) Selects the MATRIX channel for which you want to make settings. GCUE This button cue-monitors the signal of the MATRIX channel. HON This switches the MATRIX channel on/off. If the corresponding channel is off, the fader will be grayed out. IFader This adjusts the output level of the MATRIX channel. The current fader value is shown in the numeric box immediately below the fader. The numbers and alphabetical letters at the right of the fader indicate the mute groups to which that channel belongs, and show the Recall Safe and Mute Safe status of the channel. (For the significance of the numbers and alphabetical letters, see . p.18). JChannel number Indicates the number of the MATRIX channel. You can double-click this number to open the Selected Channel window for this channel. If you hold down the (< >) key of your computer keyboard and double-click this, the Selected Channel window will open as an additional view. M7CL V3 Editor Owner’s Manual 25 STEREO/MONO window In this window you can view and edit the parameters of the STEREO and MONO channels. The parameters shown in the window can be selected from the [View] menu or the menu that appears when you right-click ( key + click) in the window. You can access this window in the following ways. . From the [Windows] menu, choose [Overview] and then choose “STEREO/MONO” . Use the navigation keys in the Master window to turn on the [STEREO] button AEQ (Equalizer) Switches the EQ on/off (the L/R settings are linked). This is the same as the equalizer for INPUT CH (. p.17). BDYN1(Dynamics 1) Switches the dynamics processor on/off. This is the same as the dynamics 2 for INPUT CH (. p.17). CINS (Insert) Enables/disables the insert-in. (The L/R settings are linked.) DMATRIX SEND Here you can view and edit the send levels of the signals sent from the STEREO/MONO channel to MATRIX 1–8 bus. The method of operation and the meaning of the display are the same as for MATRIX in the MIX window (. p.23). 1 3 4 2 M7CL V3 Editor Owner’s Manual 26 J 8 6 7 5 9 J 8 6 7 5 9 Adjusts the left/right balance of the STEREO channel. FSEL (Select) Selects the channel for which you want to make settings. (You can specify L and R independently.) This is linked with the STEREO/MONO MASTER section [SEL] keys on the M7CL’s panel. GCUE This button cue-monitors the signal of the STEREO/MONO channel. This is linked with the STEREO/MONO MASTER section [CUE] keys on the M7CL’s panel. HON This switches the STEREO/MONO channel on/off. This is linked with the STEREO/ MONO MASTER section [ON] keys on the M7CL’s panel. If the corresponding channel is off, the fader will be grayed out. IFader Adjusts the output level of the STEREO/MONO channel. This is linked with the STEREO/ MONO MASTER section faders of the M7CL’s panel. The current fader value is shown in the numeric box immediately below the fader. The numbers and alphabetical letters at the right of the fader indicate the mute groups to which that channel belongs, and show the Recall Safe and Mute Safe status of the channel. (For the significance of the numbers and alphabetical letters, see . p.21). JChannel number This is the channel number (ST or M). You can double-click this number to open the Selected Channel window for this channel. If you hold down the (< >) key of your computer keyboard and double-click this, the Selected Channel window will open as an additional view. M7CL V3 Editor Owner’s Manual 27 DCA window In this window you can view and edit the parameters of DCA groups 1–8. You can access this window in the following ways. . From the [Windows] menu, choose [Overview] and then choose “DCA” . Use the navigation keys in the Master window to turn on the [DCA] button ACUE This button cue-monitors all channels that are assigned to the DCA group. BON If you turn this on, all channels assigned to the DCA group will be turned on. If you turn this off, no signal will be output from the channels assigned to the DCA group. If this button is off, the fader will be grayed out. CDCA fader This fader adjusts the level of the DCA group. The current fader value is shown in the numeric box immediately below the fader. You can set this to the minimum value (–. dB) by holding down the (< >) key of your computer keyboard and clicking the fader knob, or set it to the nominal value (0.00 dB) by holding down the (< >) key and key and clicking the fader knob. If the fader is at nominal level, the green indicator at the right of the fader will light. If a DCA group is set to Recall Safe, the R character at the lower right of the fader is displayed in green. DDCA number This is the number of the DCA group. EDCA group name This is a text box that displays the DCA group name. You can also edit the DCA group name in this text box. 5 1 2 3 4 M7CL V3 Editor Owner’s Manual 28 Selected Channel window Selected Channel window (*), ST IN channels 1–4) or output channe...
