valutazioni - 4, GPA: 4.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Digital gain for input channels / insert inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Digital gain added to 2TR IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 BALANCE control for input channels / ST IN channels . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Temporary monaural setting for paired input channels / ST IN channels . . . . . . . . . . . . 9 Front panel operating procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Screen operating procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Operation when monaural is selected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 M/S decoding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Tracking Recall function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 New functionality in system software V1.4 New functionality in system software V1.4 New functionality in system software V1.4 The following functionality and specifications have been added in version 1.4 of the PM1D system software. • Digital gain has been added to input channels/ insert inputs Digital gain has been added to input channels and insert inputs, allowing you adjust the input sensitivity in the digital domain. Digital gain can be used in input channels and insert inputs to which an AD card, digital I/O card, 2TR IN, GEQ, or EFF are assigned. Digital gain has been added to the six 2TR IN inputs. The sensitivity of the signal that is input to each 2TR IN can be adjusted in the digital domain, independently for L and R. • BALANCE has been added to PAN mode of the input channels The PAN parameter of an input channel can now be switched to a BALANCE parameter. For adjacent odd-numbered/even-numbered input channels, you can switch the PAN parameter to a BALANCE parameter. • New capability to temporarily set paired input channels/ST IN channels to monaural The signals from paired input channels or ST IN channels can now be converted into monaural. As the monaural conversion method, you can select LMONO (only the signal of the odd-numbered channel), R-MONO (only the signal of the even-numbered channel), or L,R-MONO (the signals of both channels mixed). • M/S decoding functionality “M/S decoding functionality” has been added, allowing a two-channel signal input from a MS mic to be converted into a L/R signal • Tracking Recall function The newly added “Tracking Recall” function lets you add a previously-specified offset value to the value of each fader when you recall a scene. Changes • In the PAN/ROUTING function CH to MIX screen, the send level knob to the MATRIX bus is now displayed in gray to match the color of the encoder on the CS1D. This makes it easier to distinguish the MIX send level knob from the send level knob of the MATRIX/ST ROUTING function that sends the signal to the MATRIX bus. • The rotational angle of the encoder-type knobs in the screen now matches the angle of the encoder knobs of the CS1D front panel. The index markings have changed in conjunction with this. • Since V1.4 adds BALANCE to the PAN mode, the line in the screen that indicates the encoder knob position is now displayed in red for PAN (same as before) and white for BALANCE, to make it easier to distinguish the setting. In the MATRIX/ST function MATRIX/ST ROUTING screen as well, the encoder knob positions are displayed in red for PAN (same as before) and white for BALANCE. Digital gain for input channels/insert inputs Digital gain has been added to input channels or insert ¦ If an AD card (LMY4-AD) is assigned inputs that are assigned to AD cards, digital I/O cards, 2TR IN, GEQ, or EFF. By using this, the input sensitivity can be adjusted in the digital domain even for input sources that do not have an analog head amp. Since digital gain has been added, the input channel/ insert input displays in the IN HA/INSERT, IN CH VIEW, INPUT UNIT, and MONITOR A/MONITOR B screens have changed as follows. Digital gain PM1D Manager for Windows Operating manual PM1D Manager for Windows Operating manual If a digital I/O card (MY card) is assigned ¦ If a GEQ output is assigned Digital gain ¦ If 2TR IN is assigned Digital gain ¦ If the output of...