valutazioni - , GPA:
(
)
)
Produttore : Central Pneumatic
File Size : 294.94 kb
File Nome : harbor-freight-no.40400.pdf
Lingua di insegnamento: 
Il documento viene caricato, si prega di attendere
 |
Il documento viene caricato, si prega di attendere
Facilità d'uso
Distributed exclusively by Harbor Freight Tools®. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: Read this material before using this product. Failure to do so can result in serious injury. Save this manual. Copyright© 1999 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353. Rev 01h, 09c SKU 40400 For technical questions, please call 1-800-444-3353. Page 2 Specifications Motor Single Phase, 120 V~, 60 Hz, 15.5 A, 3,360 RPM Air Tank 8 Gallon Pump Type Single Stage Max. Working Pressure 115 PSI Air Flow 6 SCFM at 40 PSI, 5 SCFM at 90 PSI, 4.2 SCFM at 115 PSI Press Switch 70 PSI Materials Cast Iron Piston and Connecting Rod Cast Aluminum Crankcase Piston Diameter 1.886” Cylinder Honing 45° Crosshatch Overall Dimensions 26” x 11-3/4” x 27” Outlet Fittings 1/4” – 18 NPT SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference. GENERAL SAFETY WARNINGS AND PRECAUTIONS 1. KEEP WORK AREA CLEAN AND DRY. Cluttered, damp, or wet work areas invite injuries. 2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle this product. 3. STORE IDLE EQUIPMENT. When not in use, tools and equipment should be stored in a dry location to inhibit rust. Always lock up tools and equipment, and keep out of reach of children. 4. DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use this product. 5. USE EYE AND HAND PROTECTION. Wear ANSI-approved safety impact goggles and heavy-duty work gloves when using this product. 6. DRESS SAFELY. Do not wear loose clothing or jewelry, as they can become caught in moving parts. Wear a protective hair covering to prevent long hair from becoming caught in moving parts. If wearing a long-sleeve shirt, roll sleeves up above elbows. 7. DO NOT OVERREACH. Keep proper footing and balance at all times to prevent tripping, falling, back injury, etcetera. 8. INDUSTRIAL APPLICATIONS MUST FOLLOW OSHA REQUIREMENTS. 9. STAY ALERT. Watch what you are doing at all times. Use common sense. Do not use this product when you are tired or distracted from the job at hand. 10. CHECK FOR DAMAGED PARTS. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the operation of this product. Replace or repair damaged or worn parts immediately. 11. REPLACEMENT PARTS AND ACCESSORIES: When servicing, use only identical replacement parts. Only use accessories intended for use with this product. Approved accessories are available from Harbor Freight Tools. 12. MAINTAIN THIS PRODUCT WITH CARE. Keep this product clean and dry for better and safer performance. REV 01j; 03h; 09c 13. MAINTENANCE: For your safety, service and maintenance should be performed regularly by a qualified technician. 14. USE THE RIGHT TOOL FOR THE JOB. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool, and do not use this tool for a purpose for which it was not intended. 15. WARNING: Make sure to fill the Air Compressor with a premium quality, 30-weight, non-detergent oil before each use. Running the Air Compressor with no oil or low oil will cause damage to the equipment. Note: The oil reservoir has an optimal capacity of 30 ounces of oil. 16. WHEN CHECKING THE OIL LEVEL: Make sure to unscrew (do not pull) the Dip Stick out. 17. MAKE SURE ALL TOOLS AND EQUIPMENT USED WITH THE AIR COMPRESSOR ARE RATED TO THE APPROPRIATE CAPACITY. Do not use any tool or equipment that does not operate at the regulator setting being used. 18. DRAIN AIR COMPRESSOR EVERY DAY. Do not allow moisture to build up inside the Air Compressor. (See “INSPECTION, MAINTENANCE, AND CLEANING” section of this manual.) 19. MAINTAIN A SAFE WORKING ENVIRONMENT. Keep the work area well lit. Make sure there is adequate surrounding workspace. Do not use the Air Compressor in areas near flammable chemicals, dusts, and vapors. 20. AVOID INJURY: Never direct the air stream at people or animals. 21. DO NOT ALTER OR REMOVE THE FACTORY SEALED PRESSURE RELEASE VALVE. 22. To reduce the risk of fire or explosion, never spray flammable liquid...