(Brown wire) 2.5mm External microphone (Optional) Gnd (Black wire) LC Box (with fuse) Acc (Red wire) Figure 1: System diagram Instructions 1. Connect the 12V (Acc and Gnd) to car supply. 2. Connect the RCA-L and RCA-R to car stereo auxiliary (AUX) input. Alternately, you can use the RCA to 3.5mm jack cable (included) to connect to car stereo that supports 3.5mm AUX input. 3. Connect TEL-INT. pin to car stereo telephone mute line (if this feature is supported). 4. Make sure that the car stereo sy

THIS PRODUCT IS NOT INTENDED FOR USE BY THE DRIVER WHILE THE VEHICLE IS IN MOTION SINCE SUCH USE MAY DISTRACT THE DRIVER OR INTERFERE WITH THE DRIVER’S SAFE OPERATION OF THE VEHICLE AND MAY RESULT IN SERIOUS INJURY OR DEATH. SUCH USE MAY ALSO VIOLATE STATE LAW. CLARION DISCLAIMS ANY LIABILITY FOR ANY BODILY INJURY, INCLUDING FATALITIES, OR PROPERTY DAMAGE THAT MAY RESULT FROM ANY IMPROPER OR UNINTENDED USES OF THIS PRODUCT. ABOUT INSTALLATION Installation of mobile audio and video experience wit

INTRODUCTION The interface adapter for iPod® by Clarion, EA1251, works by simulating the iPod as a 6 Disc CeNET CD Changer. Please consult your main unit's Owner's Manual for CD Changer operations before beginning to use EA1251. Clarion Multimedia Station of VRX series cannot control EA1251 through the KEY PAD screen or the list screen. If required so, please use the function buttons instead. Some EA1251 functions might not be available. Some main unit models with CD-Text function have the ca

Copyright © 2006: Clarion Co., Ltd. Printed in Malaysia 280-8370-00 Clarion Co., Ltd. English Contents 1. INTRODUCTION ............................................................................................................................ 3 2. CAUTION ....................................................................................................................................... 3 3. CONNECTION ...........................................................................................

5. Volume Control Allows user to set individual listening levels. 6. Auto ON/OFF Micro Switch Turns the headphones ON when placed on the user's head and turns OFF the headphones when removed. Description Of RF Transmitter Box RF Wireless Automotive Transmitter 1.Power Input 2.RCA Plug (Left Channel) 3.RCA Plug (Right Channel) 4.Power ON/OFF Switch 5.Channel Select Switch (Channel 1, Channel 2) 6.Antenna Cord RF Transmitter Specifications General Specifications Power Requirement: 12 Vdc Power Con

To ensure the best performance of your system, please read this manual carefully. EXPLANATION OF CONTROLS: (Fig. 1) Infrared Transmitter: 1. Infrared Emitting Leds - Transmit signal to headphones Headphone Receivers: 2. Infrared Sensors - Receive signal from the transmitter 3. Battery Cover 4. Volume Control 5. Power Switch 6. Power Indicator Led 7. Auto ON/OFF Micro Switch BATTERY INSTALLATION: (Fig. 2) 1. Place two (2) alkaline AAA batteries into the battery compartment of the Headp