valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
Getting Started 67 Using the Dual Mode Pad 2 Tap the virtual button assigned to the application you wish to launch, or slide your finger on the volume control bar to adjust the volume to the desired level. 3 When the operation is complete, the Dual Mode Pad automatically disables the virtual buttons. The virtual buttons cannot be used until the mode switch button is tapped again. The virtual buttons and dual mode can be enabled or changed in the Mouse Properties dialog box. Disabling or enabling the Dual Mode Pad The Dual Mode Pad is enabled by default. To change the Dual Mode Pad setting: 1 Click Start, Control Panel. The Control Panel window appears. 2 Click Printers and Other Hardware. 3 Click Mouse Properties. The Mouse Properties window appears. 4 Click the Dual Mode Pad ON/OFF tab. The Dual Mode Pad ON/OFF tab appears. 5 Select Disable or Enable, whichever is appropriate. 6 Click Apply. 7 Click OK. The Mouse Properties window closes. 8 Close the Printers and Other Hardware window. 9 Close the Control Panel window. 68 68 Getting Started Using external display devices The Fn + F9 shortcut can be used to disable or enable the Dual NOTE Mode Pad (see “Disabling or enabling the TouchPad or Dual Mode Pad” on page 241). Using external display devices Your computer comes with a built-in LCD display, but you can also connect an external display device to the available video port: . An external monitor or projector via the RGB (monitor) port. . A TV, VCR, or DVD recorder via the S-video (TV-out) port. Before connecting an external monitor or video projector, configure your computer for the type of device you are connecting. To do this, refer to the documentation for your operating system and devices. Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen. To do this: 1 Connect the monitor’s video cable to the RGB (monitor) port on the left side of the computer. 2 Connect the device’s power cable to a live electrical outlet. 3 Turn on the external device. 4 Set the display mode by pressing Fn + F5, or by configuring the Display Properties settings. Getting Started 69 Using external display devices Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key (Fn + F5): 1 Press Fn and F5 simultaneously. 2 While holding down Fn, press F5 repeatedly until the setting you want takes effect. Briefly pause each time you press the F5 key to allow time for the display to change. This hot key cycles through the settings in the following order: . Built-in display only . Built-in display and external monitor simultaneously . External monitor only . TV and LCD . TV only 3 Release the Fn ...
Questo manuale è adatto anche per i modelli :Notebook - Satellite A100-S2211TD (3.3 mb)
Notebook - Satellite A100-S2311TD (3.3 mb)
Notebook - Satellite A100-S8111TD (3.3 mb)
Notebook - Satellite A100-ST1041 (3.3 mb)